Universal remote control to control your TV, DVD player, VCR or digital cable set-top box - manually and automatically. Follow the instructions for manual setup first. If the remote still cannot control the device, follow these steps: automatic settings.
Instructions
Turn on the TV to channel 1. If the device is a DVD player, recorder, or VCR, insert a disc or video tape.
Press and hold the Code Search button on the remote until the red light is on. Release the button.
Press and release the button desired mode on the remote control for the device you want to control (TV, DVD or cable TV). The red indicator first blinks, then remains on.
Find the manufacturer of the TV or device you want to control in the list of device codes that came with your remote control remote control. Enter the code on the keyboard remote control. The red indicator turns off if the code is correct. The red indicator flashes if the code is invalid.
Press the Channel Up button on the remote. If the device responds, no additional programming is required. Click the Play button to check remote control when setting up a DVD player or VCR.
Turn on automatic search codes if the device does not respond after manual entry. To do this, press and hold the Code Search button on the remote control until the red light remains on, then release the button.
Press and quickly release the button for the desired mode (TV, DVD, cable TV). The red indicator flashes once.
Press the Channel Up button several times until the device responds. The red indicator flashes with each button press. Click the Channel Down button to go back if you accidentally missed a code. Use the Play button for DVDs or other devices that do not have channels.
Press and release the Mute button to set the code.
Several decades ago, remote controls appeared on the market. Today it is difficult to imagine a TV that has to be switched using panel keys. Philips also began producing remote controls for TVs, DVD players and other equipment. All that remains is to configure it correctly.
Instructions
In order to combine all devices under the control of one universal Philips TV remote control, connect it to your computer via a USB port. When purchasing, you should have been given a disk with software on which a database of IR codes (more than 300 thousand items) is stored.
Launch the disc and wait for the Wizard to open. This window will describe in detail each step of setting up the Philips universal remote control for your TV and other devices.
After the computer loads and opens the list of devices for which the remote control can be configured, select the required item and click “Next”. All settings will be automatically downloaded to the Philips remote control. The main thing is not to disconnect the USB cable until this process is completed.
If you couldn't find the model of the TV you need in the list of codes, don't worry. Information is regularly updated on the Philips official website. So just connect to the Internet and download the required code to your remote control.
Among other things, each remote control model from Philips has many other useful functions. Take the instructions and read about the capabilities of your device. After this, manually configure the remote control according to the requirements of your home TV. You can read more about this both in the attached instructions and on the official Philips website.
Thus, soon the numerous remote controls scattered around the apartment will be replaced by one single universal remote control, which will not only work with all types of home appliances, but will also offer its owner other tangible benefits.
There are two ways to set up your Philips universal remote to control your TV, DVD player, VCR or digital cable box - manually or automatically. Follow the instructions for manual setup first. If the remote still cannot control the device, follow the steps for automatic setup.
Instructions
Instructions
In order to unite all devices under the control of one universal Philips, connect it to a USB port. When purchasing, you should have been given a disk with software, which stores IR codes (more than 300 thousand items).
After the computer loads and opens the list of devices for which the remote control can be configured, select the required item and click “Next”. All settings will be automatically downloaded to the Philips remote control. The main thing is not to disconnect the USB cable until this process is completed.
If you couldn't find the model of the TV you need in the list of codes, don't worry. Information is regularly updated on the Philips official website. So just connect to the Internet and download the required code to your remote control.
Among other things, each remote control model from Philips has many other useful functions. Take the instructions and read about the capabilities of your device. After this, carry out manual setting remote control according to requirements home TV. You can read more about this both in the attached instructions and on the official Philips website.
Thus, soon the numerous remote controls scattered around the apartment will be replaced by one single Universal remote remote control, which will not only work with all types of home appliances, but will also offer its owner other tangible benefits.
Sources:
- how to disassemble philips remote control
For a beginning sound engineer, the main condition is to accumulate experience. How can you gain experience if you don’t have good equipment? Take advantage of the economical option: buy a cheap mixing console and connect it to the sound card of your computer. Only the sound card, in this case, should not be cheap. This option will be the most acceptable, because... you can buy an inexpensive remote control and save on audio equipment by connecting the remote control to your computer.
You will need
- Sound card, mixing console, connecting wires.
Instructions
In an audio mixer, everything that will go to any sound reinforcement equipment is called inserts. Cords with jack 6.3 stereo plugs are connected to these gaps. But stereo output does not mean that the output signal will be in stereo mode. Each jack will carry 2 mono signals: one for input and one for output. Therefore, be careful when connecting connections.
When choosing a sound one, you need to pay attention to the presence of a “jack” connection. If your board has all jack 3.5 connectors, this is, of course, worse, but for a novice audio operator it will be fine. In this case, you will have to use special adapters. It is worth noting,
Our technicians configure Philips TVs with all the necessary installations.
Experienced specialists will set up TV program channels and arrange them in a convenient sequence, and configure the parameters for connecting the TV to your home computer network and Internet access, optimize individual user settings.
We know how to tune channels on a Philips TV!
Organized for your convenience.
The Philips TV instructions for connecting external devices recommend using high-speed HDMI connection. An HDMI cable transmits both sound and image simultaneously.
If external devices are connected via HDMI ports and support EasyLink technology, they can be controlled using a standard television remote control. To do this, you must enable the EasyLink CEC function on all devices. By default, this feature is enabled on your TV. Depending on the manufacturer, the names of the HDMI CEC function vary and may be called Anynet for Samsung, Aquos Link for Sharp, Bravia Theater Sync for Sony, Kuro Link for Pioneer, Simplink for LG, Viera Link for Panasonic. Not all devices from other brands are fully compatible with EasyLink.
If external device It is equipped only with a DVI connector; according to the instructions for the TV, you should use a DVI to HDMI adapter to connect.
The Philips 40PFT4109/60 TV allows you to connect a soundbar or home theater to HDMI port 1. This port supports HDMI ARC, which eliminates the need for additional audio cables as HDMI ARC technology allows both video and audio to be transmitted.
The Philips TV is connected to the connectors located on the back and side panels of the TV.
On the back of the Philips TV there are connectors:
HDMI high speed connection. HDMI1 ARC has an audio return channel.
SERV service port.
TV ANTENNA:75 Ohm coaxial IEC
SCART (RGB/CVBS) connection of external devices.
On the side panel of the Philips TV there are:
Digital Audio OUT: SPDIF high quality audio output
CI slot common interface
USB connectors for connecting USB devices
Satellit connecting a satellite dish
conditionally divided into three zones, each of which includes a specific set of buttons.
Top of the remote control:
1)On button- turning the TV on and off
2)Play buttons- play, stop, pause, rewind.
3)TV GUIDE button- electronic program guide.
SETUP button- opening the settings page.
FORMAT button- image format menu
Middle part of the remote control:
1)SOURCES button- menu for the list of connected devices.
2)Color buttons- Direct selection of parameters. The blue button opens help.
3)INFO button- Information about programs.
4)BACK button- Return to the previously selected channel.
5)HOME button- Main menu.
6)EXIT button- transition to watching TV channels.
7)OPTIONS button- Enter or exit the Options menu.
8)OK button- Confirmation of the set value.
9)Navigation buttons- Move up, down, left and right.
10)LIST button- Open or close the channel list.
Setting up TV channels
Any Philips TV channels in the ALL, FAVORITE, RADIO, NEW lists can be renamed. To do this, select the channel in the list that you want to rename, press the OPTIONS button on the remote control, select RENAME and then press OK. The new name can be entered directly from the remote control keyboard or using the on-screen keyboard.
How to tune channels on TV
How to tune channels on a Philips TV in a convenient sequence of TV programs? This is not always easy, since many TV models do not have the ability to sort channels after auto-tuning. The developers have provided for the creation of a folder of favorite channels, into which you can enter the necessary TV programs in the desired sequence, but this is often inconvenient for the user. You can tune your TV to channels in a convenient sequence by starting automatic tuning of television channels, and then placing a set of your favorite TV programs in first place in manual tuning mode.
How to adjust the screen format
Change the picture format and size of your Philips TV. Currently, television programs are transmitted from different formats
images, causing black bars to appear on the top and bottom or both sides of the TV screen.
To adjust the format and size of the image on a Philips TV, you need to press the FORMAT button while watching and select the most suitable one from the menu list. The following image formats are available: Auto
- The TV automatically changes the picture format in accordance with the encoding of the input signal. Super magnification
- Removing black bars on the sides when broadcasting in 4:3 format, adjusting the image to fit the screen. 16:9 format extension
upscaling standard 4:3 to 16:9, not recommended for HD and PC. Wide screen
4:3
- Stretching to 16:9 format
- Image in standard 4:3 scale
Answers to questions on Philips TV
How to connect digital TV to Philips 37PF 9946/12 Can this model accept digital television
through the receiver? The screen says NO SIGNAL.
02/10/2019, Voronezh.
This TV must be used in monitor mode, switching it to AV mode, and connect the signal from the receiver to the AV input. Program settings and channel switching are carried out not on the TV, but on the receiver.