IN Wi-Fi points access mode “repeater” (repeater) is used to expand the Wi-Fi coverage area.

For example, a router is installed in an apartment, but in the back room a laptop, phone or tablet has a weak signal level. You can, of course, connect a more powerful one to your laptop Wi-Fi adapter, but what to do with your phone and tablet? In this case, an access point that supports the repeater operating mode will help us. A TP-Link access point will connect via Wi-Fi to your router (for example TL-WR1043ND) and transmit the signal further than a phone, tablet or other client device can.

With the help of a TP-Link repeater you can strengthen the Wi-Fi signal for your Wi-Fi devices.

Repeater mode is supported by TP-Link TL-WA500G, TL-WA501G, TL-WA5110G, TL-WA5210G, TL-WA701ND, TL-WA801ND, TL-WA901ND, TL-WA730RE, TL-WA830RE wireless access points.

Connecting a TP-Link access point

The TP-Link access point is connected to a computer or laptop using a twisted pair cable. Power is connected to the access point using a power supply or via a POE injector (depending on the model). After setting up the access point, the cable from the computer to the access point can be disconnected.

Setting up a network card on a computer or laptop

Open “Start” → “Control Panel” → “Network and Sharing Center” shared access».

Select “Change adapter settings”.

Right-click on “Connect via local network" and left-click to select "Properties".

Select “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties”.

In the window that opens, select “Use the following IP address” and specify the IP address 192.168.1.21 , Subnet mask 255.255.255.0 and click “OK”.

Setting up an access point in Wi-Fi repeater mode

Open the browser Internet Explorer(or any other) and enter the address 192.168.1.254 (default IP address)

Attention! The proxy server should not be specified in the browser settings

In the next window, enter your username admin password admin.

Open the menu Wireless→ Wireless Settings and in the field Operation Mode: choose Universal Repeater(or Range Extender) .

If you are using a router with WDS mode enabled, then select the mode Repeater.

Press the button Survey and in the window that appears, click Connect opposite the point to which we will connect.

After this, save the settings by pressing the button Save, click click here to reboot the device.

In the next window, click the button Reboot and wait until the device reboots.

Now you need to configure your security settings. Go to the menu Wireless→ Wireless Security and select the encryption type and password that is used on the router to which our TP-Link repeater is connected. In our case, WPA2-PSK encryption was used.

Be careful! If your router uses WEP encryption, then in the fields Type, WEP Key Format, WEP Key, Key Type The settings must be specified exactly the same as on the router to which the access point will connect. Otherwise, the TP-Link repeater will not be able to connect to the router.

You can understand that the repeater cannot connect to the router in the menu Status. If in Wireless - Channel When the page is refreshed, the channel number constantly changes, then the repeater cannot connect to the router due to incorrectly specified security parameters.

After configuring the security settings, save the settings with the button Save and reboot.

We check that the repeater is connected to the router. Go to the menu Status and look at the connection parameters. In field Name (SSID): the router to which the access point is connected should appear, the channel number Channel, MAC Address and other parameters. In field Traffic Statistics data packets must “run”.

Connecting equipment to a Wi-Fi network

You can connect to Wi-Fi networks smartphone with Wi-Fi, tablet or laptop.

To connect a laptop to a Wi-Fi network, find the control icon in the lower right corner of the screen Wi-Fi connections. Select our Wi-Fi network from the list and click the “Connect” button.

Enter the password to connect to the Wi-Fi network, which was set in the router settings.

After this, the laptop will connect to the Wi-Fi network.

Checking the connection of devices to the Wi-Fi repeater

After connecting any wireless device (laptop, phone, tablet) to the Wi-Fi network, check that the device is connected to the repeater and not to the router. To do this, open the menu on the access point Wireless→ Wireless Statistics and we see the devices connected to the TP-Link repeater.

If the MAC address of your device is not in the list, and the Internet works on it, then the device has connected to the router, since at this point the router’s signal is better than the repeater’s signal. Place the access point far from the router and connect next to it. If the device still cannot connect to the access point, check that the access point is connected to the router and that its encryption type and password are set correctly in the security settings.

Restoring a TP-Link access point to factory settings

If you cannot enter the settings of the Tp-Link access point or have forgotten your login password, the Reset button on the back of the device will help you restore the factory settings and password.

Press and hold the Reset button for about 8-10 seconds.

There are two WiFi operating modes in access points. Most often in WiFi routers In addition to the option of working as an access point, there is also an option to work as a repeater. Repeater (“repeater”) - used to increase the area WiFi coverage main access point. Let's consider this case: a router with Internet is installed in the house, but the problem is that in the outer rooms the WiFi signal level is weak or completely absent.

Lay a LAN cable (also known as “twisted pair”) and set up one WiFi zone? There is no need to do this, just set the second device to repeater mode and there will be one WiFi zone from the Internet. Two access points will be connected via WiFi, which means the WiFi signal will be stable and of normal strength throughout the apartment. Therefore, you don't have to switch between different WiFi zones when moving from room to room.

Before purchasing an additional access point, make sure that it supports the “repeater” operating mode.

Although often manufacturers network equipment and complement the functionality of their devices thanks to new firmware versions, or you can not install original firmware. But still, you shouldn’t hope for this, but immediately buy a device with the necessary capabilities. For example, almost all TP-Link models can be set to signal relay mode from the first one. Next, let's look at an example of organizing the connection of devices and, using the example of a router, we will configure it in repeater mode.

When merging multiple points WiFi access A conflict in IP addresses may arise into one network, which is why it is first necessary to vary the IP address of the WiFi device, which in the future will function as a “repeater”.

To do this, we connect an access point to a computer or laptop via twisted pair cable. Although you can change the router settings via a WiFi connection, it may be that your device does not support such capabilities. Another nuance, in older models of routers, may be that the LAN cable will have to be connected to port number 1 on the router in order to configure it.

By the way, power is connected to the router directly by the power supply or thanks to POE injector. It all depends on the specific model.

Setting up a network on a computer

Click “Start”, find “Control Panel”, and then “Network and Sharing Center”.

Right-click on the active adapter and click on “Properties”.

The window may have a different appearance; to change the appearance, click on the drop-down list of the “View” category and select “Small icons”.

In the case of Windows 10 or 8, 8.1, you can do it differently, just right-click on “Start” or Windows icon, which is in its place.

Select “Control Panel” from the menu. Further actions are similar to those described above.

So, you need to click on “Change adapter settings”.

Select connection protocol version 4 (TCP/IPv4) for the Internet and click “Properties”.

We set the receipt of IP addresses to automatic mode, similarly repeat the setup if there are other connections, both local and wireless network.

Setting up a network on the router

Now we will configure the router that will work as an amplifier of our main network. After connecting it to the PC, go to its settings. We launch any browser, in the line where we enter sites, we type the IP address of the router, which is printed on the sticker for the router. For example, 192.168.1.254.

Attention if you use satellite Internet, then disable the proxy server. Perhaps you have a proxy server for other reasons, but this moment it must be turned off!

Now you will need to enter your name and password. In both fields enter - admin, given password It’s also on the label or box from the router; it, like the IP address, may differ for you!

Setting up the router in repeater mode

Now go to the Wireless menu. Then in Wireless Settings and then in Operation Mode: indicate Universal Repeater (or Range Extender).

If the router has WDS mode active, you must select the Repeater operating option.

To save the settings, click Save, and then click here to reboot the configured router.

If the IP addresses of both routers are the same, then change the future WiFi signal repeater to the second IP address. To do this, simply change the last digit in the address.
In the new window, click the Reboot button and wait for the router to reboot.

To complete the settings, go to the Wireless menu and the Wireless Security section.

We specify for this router the same network password and encryption type that are used on the main router. To put it differently, we indicate the security settings on the repeater that are registered in the main access point, with which we are expanding the coverage area.

We warn you that all the settings of the base router and the repeater are the same.

You need to make sure that the repeater has communicated with the access point. To do this, go to the Status menu. Dynamically changing channel numbers on the Channel page in Wireless means that the repeater is having problems connecting to the main router via WiFi. This can only be due to the fact that the security settings in the repeater are entered incorrectly.

Now we save the settings. To do this, click on the Save button.

We reboot the router.

We make sure that the second router was able to connect to the main one. To do this, go to the Status menu and check the connection parameters. If the settings are correct, the Name (SSID): field of the repeater duplicates the data of the base router. The repeater will have the same duplicate settings of the main router in the Channel and MAC Address parameters. The Traffic Statistics field will highlight the exchange of data between routers. This way you can configure a coverage area of ​​three or more access points.

Connecting to WiFi

There are no difficulties in connecting such a network. Everything is banally simple. For example, on a laptop, in the tray, near the clock, click on the WiFi control icon and connect to our network, to do this, click on the “Connect” button. Enter the security key for the router.

Checking the connection to the WiFi repeater

You need to make sure that the repeater works with the device. To check, enter the Wireless category Wireless Statistics. We see a list of equipment connected to the repeater.

The MAC address of this equipment is written here.

If the required device is not visible, but the Internet appears, it means it has connected to the main router. Perhaps it's just software routers determined that the signal is in this place from the base router is stronger. Move the main router with the access point further and try to connect again. If an attempt to connect to the repeater is unsuccessful, it means that the encoding type or password was entered incorrectly in the repeater’s security settings.

Restoring repeater parameters

If you were unable to enter the menu of the router, which was planned to be made as a repeater. Or you need to reset its parameters, but the password and login have been changed. In this case, pressing the Reset button on the back of the network equipment will help.

Press Reset and hold for up to 10 seconds. The setting will be reset to factory settings.

Found a typo? Select the text and press Ctrl + Enter

TP-LINK is known as a manufacturer of functional, yet affordable and easy-to-set up types of communication devices. Among the popular types of products offered by this market brand are repeaters, as well as routers that have the corresponding function. What are the main capabilities of both types of devices? How are they configured?

What is a repeater?

A repeater is a device that allows you to amplify the Wi-Fi signal coming from your router. The need for its use arises if the power of the router is not enough to ensure the functioning of a wireless network within the area of ​​a room or office. The functionality of the repeater, in principle, corresponds to that which characterizes the operation of the router. That is, when connecting to a wireless network through a repeater, the user has the right to expect the same performance from the network infrastructure as if the connection was made directly to the router.

It can be noted that an alternative to using the devices in question may be to use the router itself, for example TP-LINK, in repeater mode. Let's consider how the device in question functions as an independent element of the infrastructure, as well as how to use the router in the appropriate mode.

What are the main features of TP-LINK repeaters?

First of all, it is worth noting that TP-LINK also produces repeaters, within a very large model range. If we talk specifically about devices of the type under consideration, then a typical solution that combines the capabilities characteristic of most modern repeaters from TP-LINK can be called the TL-WA850RE device. In particular, this product has the following main advantages:

• the TP-LINK TL-WA850RE repeater is capable of operating in radio signal amplification mode, thanks to which the wireless network can be expanded over a large area;
• the device has small dimensions, thanks to which it can be installed even if there is little free space in the user’s room or office;
• If necessary, you can also connect wired devices to the router via the Ethernet port.

The device in question can quickly connect to Wi-Fi routers that have a WPS function, provided that the routers have the corresponding button. If such a connection was made once, then re-configuring the TP-LINK repeater is generally not required.

If we talk about communication capabilities using an Ethernet port, then solutions such as game consoles, SMART TVs TV, as well as various multimedia devices. In this case, the device connected to the cable can, using the resources of the repeater, also be part of the wireless infrastructure.

The TP-LINK repeater in the modification under consideration is equipped with sufficient big amount LED indicators, through which you can, first of all, determine the location of the device. It is recommended to install the repeater in places where at least 3 corresponding blue indicators will light up.

If necessary, the TP-LINK TL-WA850RE repeater can be used as a communication device using a special mobile application. This solution allows you to connect your phone or tablet to a wireless network, and also allows you to control various repeater options.

Let us now consider how the TP-LINK repeater is configured.

Setting up a repeater: network connection parameters

Before connecting the device in question to the router, you should pay attention to correctly setting up the second device. So, you will need to specify the following information in its parameters:

• IP address;
• the name of the network to which it connects;
• encryption type;
• password.

After necessary settings completed, you need to move on to the next step of setting up the connection between the repeater and the router. It is noteworthy that it involves temporarily connecting the first device to the computer via a cable - just using the Ethernet port. In this case, while the TP-LINK repeater is interacting with the PC, the router must be turned off.

Setting up a repeater via PC

In order to configure the device in question, you need to use the web interface for managing device options - through a browser. Once you open it, you need to select the Network function. After this, you need to check whether the IP address of the repeater is in the same segment as the IP address of the router. That is, the first 3 groups of numbers in the IP address must match completely. If there is a difference of at least 1, you must enter the correct IP address in the repeater settings, which belongs to the corresponding segment. Then you need to save the settings by clicking on Save.

After this, you need to select the Quick Setup option in the web interface. After that, click on Next, then on Wireless. Then you need to select the Range Extender option and set the Operation Mode parameter for it. The next step is to search for a router on the network using the Search function. The connection must be made based on the network name that was defined for the router in the previous step. After selecting this option, you must click Save.

Setting up network protection: nuances

Next you need to configure by defining optimal parameters, in accordance with which the repeater and WiFi should operate. TP-LINK allows, in particular, to set the level. To do this, select the Wireless option, then Wireless Security. Then you should set the WPA2-PSK parameter, as well as the After method, enter the password corresponding to what is specified in the router settings. Then click Save.

Thus, the user’s main task when setting up a repeater is to enter the same settings into the device in question and into the router to which it connects.

Repeater setup: testing

After setting up the corresponding device, you need to check how correctly the wireless network will function. To do this, select the System Tools option, then Diagnostic. After this, you need to enter the address that is set for the router in the IP address field. Then you need to click on Start to launch the testing mechanism.

TP-LINK router as a repeater

At the beginning of the article, we noted that an alternative to using a repeater in the absence of one or if it is necessary to build a wireless network infrastructure on an even larger scale can be the use of a router in repeater mode. In particular, many of the devices produced by the TP-LINK brand have this function. Among such solutions is the TL-WA901N device. Let's consider TP-LINK as a repeater in the appropriate modification.

It can be noted that the router in this modification has the following capabilities:

• data transmission within a Wi-Fi network at a speed of up to 300 Mbit/s;
• ensuring the functioning of the wireless infrastructure in router, WDS modes - that is, repeater, bridge;
• quick setup of data transfer with encryption;

In addition, the device supports PoE technology - up to 30 meters, thanks to which the router can be installed in hard-to-reach areas.

Now in more detail about using the “repeater” function of the TP-LINK router in the TL-WA901N modification. First of all, it must be done via a computer.

Router as a repeater: configuration using a PC

To solve this problem you need to connect to a PC via network cable RJ-45. After entering the Windows “Control Panel”, select the “Network and Internet” option, then “Network and Access Center”. In the corresponding interface, you must select the option that allows you to change the adapter settings. Then right-click and select “Local Area Connection”, then “Properties”. In the interface that opens, you need to set the optimal connection parameters: the IP address of the adapter, as well as the subnet mask.

The next step is to use the router management web interface, similar to what we used to configure the repeater. You need to open your browser and enter the router's IP address into the address bar (usually it is indicated on the bottom of the router case). On the page that opens, you need to enter your login and password - in general, this is the word admin.

Directly in the router control panel, you need to select the “Wireless network” option, then “Network settings”. After that, we indicate the correct options on the page that opens. The main thing here is to indicate that the router will be used as a universal or regular repeater (the second option must be selected if WDS mode is activated). After this, you need to click on the search button, and in the list that opens, select the router that you want to relay. Then click on “Connect”. After that, save the settings.

The router should reboot.

Router as a repeater: setting up network security

The next step in setting up the TP-LINK router in repeater mode is to determine the security parameters of the wireless network. To solve this problem, you must select the “Connection Security” option. It must reflect parameters that fully correspond to those installed in the router to which the device being configured is connected. This is a very important nuance, because if the settings are different, the relay will not function correctly.

After this, you need to reboot the device and check how the router functions as a repeater. To do this, you need to go to the “Status” tab in the router management menu.

Router or repeater?

How to setup TP-LINK router as a repeater, we studied it using the example of one of the popular modifications of routers, but the problem is solved in a similar way on other common devices in the TP-LINK line. The scheme we have considered can thus be considered sufficiently unified. To configure different devices in order to use them in repeater mode, very similar software interfaces are used (not counting the nuance that they may differ in design language).

Both options for deploying wireless network infrastructure can be considered equivalent from the point of view of ensuring the stability of its operation. In principle, it does not matter whether the original repeater is used or a router is used in this capacity (but it is desirable that both devices be released by the same brand - TP-LINK). A repeater, from the point of view of ensuring the functioning of the network, may not be enough on the required scale, so it can be supplemented with a router that supports the repeater function with a similar level of stability and network service performance. Both devices can be interchangeable because they essentially perform the same function. In addition, according to similar principles, configuration is carried out, adapted to the functionality of both TP-LINK devices. The repeater mode of the original device and the router are activated and operate within a single algorithm.

The most important thing in setting up both types of devices is to maintain synchronism in the device addressing parameters, as well as those related to ensuring the security of data exchange. Solving this problem is made easier, again, by the fact that similar software interfaces are used to configure both the router and the repeater.

Summary

So, we looked at how to set up a TP-LINK repeater as an independent device, as well as use a router produced by this brand as a repeater. Both methods of deploying wireless network infrastructure allow you to increase the coverage area of ​​the Wi-Fi signal and provide connection to it for devices located at a considerable distance from the router or that have insufficient sensitivity to the level of the signal from it.

Probably everyone is familiar with the situation when in the far corner of the apartment it is impossible to connect to home network- so much weak signal. Or when several people are sitting on the home network, which causes the download speed to drop significantly. A WiFi signal repeater is a great way to deal with such minor problems. What it is and how it works, you will learn from this article.

What is a repeater?

A Wi-Fi repeater, also known as an amplifier, repeater or repeater, is a device that helps to significantly increase the coverage area of ​​a network signal. It receives the signal from the router and ensures its further transmission. You just need to allocate an extra outlet for it and understand the network settings. Please note that you need to install the Wi-Fi repeater in a place where the main signal is still strong enough. At least commit initial installation and setup in the active coverage area, and then you can move from outlet to outlet to try all the relay options and find the optimal one for your room.

Repeater operating principle

Why do you need a Wi-Fi repeater? The fact is that if you decide to go ahead and simply increase the signal strength of the router so that it “catch it everywhere,” then this will not lead to anything good. Electricity consumption will increase, the device will overheat, and as a result everything will end in failure.

Another useful note: as we noted above, a repeater is often called an amplifier, but this is not entirely true. WiFi repeater does not boost the existing signal. It just spreads it over a larger area. Buying a repeater will not strengthen anything and will not make your Internet super-fast, but rather, on the contrary, will slightly reduce the speed due to the creation of another signal distribution point. But this should not alarm you - we will look at the effect of the repeater on the speed below and explain in which cases it will be insignificant.

Do you need a repeater?

Before you go shopping for a repeater, think: maybe there is another solution to the problem. We are not even talking about the increase in signal strength mentioned above, but simply about where in the apartment the router is located. The closer your device is to the geometric center of space, the more uniform the signal will be broadcast in all directions. Also check which direction the router's antenna is pointing. For horizontal signal distribution, it must be directed upward.

What does a Wi-Fi repeater look like?

Meet different models amplifiers. Some are somewhat reminiscent in size and shape Charger For mobile phone, only without wire. For example, the model below looks like a compact curved plate with a power plug, LED indicators, an Ethernet cable port, and a reset button.

There are models that are not much different in shape from a router.

Typically, the package also includes instructions, an Ethernet cable and a driver disk.

It couldn't be simpler: the WPS button

Most modern devices have a magic WPS button (or QSS on some models), which ideally is designed to make life much easier, but in real life, on the contrary, sometimes interferes with the use of the network.

If both your router and repeater have this button, then all you have to do is press it first on one device and then on the other. A few minutes of waiting until the Wi-Fi repeater and the router detect each other, and voila - you can work. But there are recommendations that advise setting up the repeater manually, choosing a specific WiFi network, in order, firstly, to reduce the number of failures in relaying, and secondly, to protect yourself. WPS technology is easy to hack. Therefore, it is often advised to disable this mode altogether if you do not have to connect new devices often.

Also note that sometimes the WPS button is combined with the Reset function. It all depends on the duration of the press: if you hold your finger on the button longer, then instead of turning on WPS, reboot the repeater, and all the settings you have set will be reset.

How to set up a Wi-Fi repeater manually

For a more stable signal, it is better not to rely on WPS, but to register the entire configuration manually. Connecting a Wi-Fi repeater is actually even easier than setting up a router. First of all, plug the Wi-Fi repeater into a power outlet and connect to it via a computer using a cable or Wi-Fi. Then open your browser and enter the IP address in the address bar; you will find it on the back of the repeater. The screen will refresh and the login form will appear. There you enter your login and password: if you haven’t changed anything in the router settings, then by default it’s admin/admin. The settings page will open.

Here you can name your Wi-Fi repeater somehow or leave it with the factory name. The final stage is to enter the password for your Wi-Fi in the required field.

What's happening to Internet speed?

Sometimes doubts arise about the advisability of purchasing a repeater. The main argument is that the signal propagation range increases, but the overall Internet speed decreases. The practice of using repeaters shows that speed fluctuations occur: any additional link in the Internet “distribution” chain will reduce the flow. However, the decrease, as a rule, is not so significant as to greatly affect the signal strength, and is largely determined by technical characteristics devices in the chain. In other words, the Internet will not “glitch” and “slow down” if your devices initially catch the signal tenaciously.

Router as an alternative to a repeater

There is a common opinion that if you have an unnecessary but working router at home, then it is not at all necessary to purchase a WiFi signal repeater. Many models are designed so that they can perform the functions of a repeater, the main thing is to configure them correctly. This is a longer process than setting up a regular repeater, but it is quite doable on your own. Please note that it is easiest to establish a connection between two devices from the same manufacturer - there is a greater chance that the routers will notice each other and work smoothly. The setup process itself also depends on the brand.

First, the router that you are going to use as a Wi-Fi repeater will need to be connected to the computer using a wire. Then you will need to check the adapter settings (via the Network and Sharing Center, which can be accessed from the Control Panel). The device must have an IP address of 192.168.1.21 with a subnet mask of 255.255.255.0.

Then, just like when setting up a repeater, you will need to type the IP address from the bottom of the device into the address bar. Use the standard login and password again - admin/admin. On the page that opens, you will need to find the “Wireless Mode” tab and go to settings. We are interested in the “Enable WDS” option - this way we will create a network that will connect two routers. You will also need to change the IP address of the router, which will act as a repeater, so that you can enter the setup mode. You can simply change the last digit or add a zero after it.

After this you need to open the list available networks, find the one you need, select it and enter the password. By the way, do not forget to protect the network on the second router so that connection to it is also carried out using a password. To do this, we go to “Security Settings” and in the “PSK Encryption Key” column, enter our password and save.

Now the router works as a WiFi repeater. You can disconnect from your computer and install it in the desired location.

Checking the connection status

After you have configured the repeater or router in repeater mode, you need to check how the Wi-Fi repeater works and how well it picks up the signal. It is advisable to check on all your devices - laptops, tablets, phones - whether they see the network distributed by the repeater or continue to connect to the main router (for this you can enter different names in the settings). Also check whether you have installed the Wi-Fi signal repeater for the router in a suitable place and whether you have achieved your goal of improving the quality of communication.

To do this, you don’t just have to walk around your apartment with your smartphone and count the number of sticks in the connection, as everyone usually does. Download one of the special applications to your device that can check signal strength.

Please note that if you need to expand network coverage over a fairly large area, and even in different directions (for example, to the floor below and to the next room), then most likely you will have to buy two repeaters.

Full description

TP-LINK TL-WA850RE - signal amplifier, wireless, device speed reaches 300 Mbit per second.

It amplifies the signal wherever the signal goes and even where it is not possible to lay a cable.

It has a beautiful small size design. This makes it possible to install the device anywhere and connect it to any available outlet. The network coverage area becomes larger by pressing one single button called Range Extender.

With a wireless data sending speed of 300 Mbps and a small size, it can easily expand the area covered by a wireless network. The Ethernet port gives the TL-WA850RE the ability to act as a wireless adapter and connect wireless devices.

How TP-LINK TL-WA850RE works

It is needed to connect wireless devices, increase the area covered by the network, and remove dead zones. This makes it possible to improve without problems wireless connection. Thanks to the information transmission power of 300 Mbit per second, the device can be considered ideal for watching good quality movies, play games or listen to music.

Thanks to its beautiful and small body, you can easily install it where you need it, as well as change its location. Another big advantage is that it easily remembers the network to which it has previously connected. If you replace your router, you won't have to configure any new features on your device.

You can easily increase your network coverage area without installing another cable; this can be done by just pressing a button. You can set up a secure connection by clicking the Pair button.