Entering biss keys is not a difficult task, for which you need to call specialists. The main thing is to understand the device, start the activity of the built-in emulator and enter the encoding on the satellite receiver.
With the advent of satellite broadcasting, accordingly, various kinds of signal coding systems appeared. The satellite signal coding system allows you to restrict access to view a specific channel or a range of channels. Thus, a simple layman cannot get open access to viewing and launching encrypted channels, with the exception of a person who has specialized equipment for decoding.
Beyond the presence pay channels, encoded by one of the many signal coding systems, there are also free TV channels - FTA-Free to Air, to which everyone has access to view. FTA channels, like many encrypted TV channels, can be shared. For example, on one transponder (a device for receiving and transmitting signals), broadcasting of 2 FTA channels and 10 television channels with the Viaccess signal coding system can be broadcast.
For this period of time, there is a whole list of coding systems for satellite reception and transmission of signals: DRE, used by Tricolor; Viaccess used by the NTV Plus channel; Irdeto, Conax and many others, including BISS, which is the simplest coding system satellite signals, which requires 16-digit keys to decode. For a given time period, the number of channels encoded with the BISS encoding is many.
To access the broadcast of a channel encrypted using BISS encryption, you only need to enter a 16-digit access key to open it. Entering access decoding keys is allowed on any type of receiver (satellite receiver) that has an emulator. Any biss keys can be maintained, saved, after which access to view the required channel is opened. Decoding broadcasting channels, provided that the signal is encrypted using biss, is quite simple, you just need to find the keys for desired channels on the satellite, enter the code into the emulator and watch your favorite TV shows.
Receiver encoding emulator
In fact, on all satellites without exception there is a list free channels, which can be viewed without a subscription fee, cardsharing and cards. This allows you to save, thereby, on the receiver, since satellite receivers designed for open available channels, of course, cost little money.
An encoding emulator, at its core, is receiver software that helps open encrypted channels. So the emulator programmatically allows you to simulate, in other words, emulate a card that supports certain encodings. Receivers may support one or more encodings.
The presence or absence of an emulator on the tuner is allowed as follows:
- Pay attention to the full name of the software (software) of the receiver;
- The name must contain the sign - $. For example, the name might look like this: S821CISKV_$SPR_A3238. The absence of such a sign in the name means that the existing tuner, that is, the software is not endowed with an emulator.
- If there is no emulator in the receiver software, the device should be reprogrammed.
If there is a built-in emulator in the tuner software, it is worth proceeding with the subsequent steps for activating it (the indicated digit codes are not suitable for all emulators), which may vary in some way depending on the receiver series:
- The button - "Menu" is pressed;
- Next, it is worth consistently leading a series of specific numbers - 19370. after which a frame is displayed on the screen, where 2486 is immediately entered.
- Next, the item is selected - "Games", in fact, there is the emulator itself.
- After dialing the first digits, a frame may not appear, which indicates a mistake made when entering. It is worth completely exiting the menu and starting the input process again, from the first item.
Satellite receivers of the Globo 4000-4100c series and their clones
Entering the biss keys into the receiver for receiving satellite television programs to open free television channels is one of the ways to somewhat expand the list of the number of channels in everyday life. The 4000-4100c series receiver uses the Ali 3329C microprocessor. The retail offer also includes the so-called "clones" of Globo 4100C series receivers. Typical products enter retail shelves under different brand names. For example, a series of tuners Baff, Opticum, StarTrack, Eurosky, Locus, Orton, Sku Fly, Openfox, Digital Box and Cosmosat and some others. Their distinctive feature is hidden exclusively in the design of the external structure.
Before entering the biss keys, it is worth using the remote control remote control, enter the tuner menu in the system-information section, where you can view the firmware, or rather its version. It is permissible to see there approximately the following information: amstar 1.4.03 EMU. The word should be of interest - EMU, which is an emulator already familiar to us. Typical operations are done on virtually all devices.
A small instruction on how to enter the biss keys into the Globo 4100c tuner (and its “clones”), which can be considered, for example, on one of Ukrainian channels, satellite television TV channel broadcasting Pershiy Nacionalniy:
- To begin with, we launch the tuner and go to any of the well-broadcast television channels, preferably which should be decoded.
- From the remote control, you should go to EMU (emulator), dialing a combination of numbers on the remote control in turn, for example, 9339.
The combination of numbers may differ from the indicated one, depending on the type of tuner model (it may be a “clone” of the receiver). And also from the firmware version of the device. So the combination of numbers can be different, for example: 9976; 9776 or 9766.
- After entering the correct combination of numbers, the EMU window will open on the screen. Further, when using the same remote control for the receiver, it is recommended to go a little lower and select the menu called “Key Edit”, and then stop the selection on the BISS menu (biss).
It may happen that when you enter the EMU of the Orton series satellite tuner, the biss encoding may not be found in the menu list list. Then you should choose another receiver encoding from the proposed list, which will help activate the biss. So it’s worth entering the program menu and entering a new, so-called “empty key”, while entering CAID 2600 using remote control receiver control, the green key is entered key. Next, the OK key is pressed on the remote control, which saves the information.
It is worth noting that after entering the biss menu, where biss keys are entered, it is permissible to see a list of the list of already added keys (keys). Although the list may be empty due to the fact that no one has previously tried to maintain information, or they simply were not present in the tuner firmware itself. In order to maintain and add a new key, it is permissible to use one of two options:
- Edit the biss key already there and not actually used.
- Add a new biss key, for which we use the green key on the remote control.
In order to enter and add a key to the channel, which is taken into consideration as an example (Pershiy Nacionalniy), it is worth knowing its (channel) data:
- transponder frequency;
- TV channel ID;
- And biss himself
The information is available in the biss keys menu list, where in the typical case of the channel in question, the transponder frequency is 10806; ID ident - 5; biss key - 10 06 10 00 11 07 11 00. Next, you should start adding. The green key located on the remote control of the tuner is pressed and a window with an approximate mark: edit code is opened with its help, where the columns are written, in which the following actions are performed:
- The CAID column should not be changed;
- The row of the Servid column is filled with information ID ident. In this case, the TV channel ID is 5.
- In the Freq column, which indicates the frequency of the TV channel transponder, it is worth entering the frequency of the channel in question - 10806;
- In the line of the Key Data column, enter biss key - 10 06 10 00 11 07 11 00.
To enter alphabetic values, color keys on the remote control of the receiver are used: blue, yellow, red, green. So are the P+ and P- keys.
The main thing, after entering all the data in the column menu, do not forget to click on save - the OK key. The process is completed, it is permissible to continue entering the code for other TV channels, or exit the menu by pressing the EXIT button on the Orton tuner control panel.
How to enter biss keys in the satellite receiver Globo 4100c and its clones? You can enter the BISS keys manually using the remote control. To do this, you need to make sure that the encrypted channel you want to open is encoded in the BISS encoding. We turn on the tuner, and set an open channel for viewing. On the remote control we dial a combination of numbers 9339, in some receivers 9766, 9776, 9976.We enter the emulator, now using the remote control, go to the Key Edit item, select the BISS item.
If there is no BISS item in the list, then select any encoding and create a new key with CAID 2600. Adding a new key is done with the green key, then press the OK button, the key is saved.
There are two ways to add keys: Adding a BISS key using the green key or editing an existing one using the red button on the remote control.
To add a key, you need to prepare data - channel frequency, channel ID key in the format of 8 pairs of digits.
CAID - for BISS encoding is always 2600, Serv ID - channel ID, Freq (frequency), Key Data - this is the BISS key itself. To enter the letters of the BISS key on the remote control there are keys - red, green, yellow, blue, and keys P-, P +. After entering the data, click "OK"!
Entering Biss keys into the Globo 4100c tuner can be done much easier:
1. We become on the encoded BISS channel and press the button on the remote control "i" (info):
2. Press the red key on the remote control and get into the Biss key input menu.
3. Now we enter a 16-digit key (8 pairs of numbers) and save.
4. Now you can start watching.
How to enter BISS codes into satellite dish receivers?
Among all satellite channels, there are many coded ones that cannot be watched without connecting a special paid service package of your operator. One way to connect such channels is to enter the BISS keys into the satellite TV receiver.
First you need to decide which specific TV channels you want to decode on your receiver. You can find suitable BISS keys on the Internet, for this you just need to enter the appropriate request with the name of the TV channel.
Most often, no problems arise, because. many users use this method. But it happens that the provider recently changed the channel frequency to another, transferred its signal to another satellite. Then the BISS code also changes. Then you have to wait until someone puts new keys on the Web.
How to enter BISS keys into the tuner, setting up the tuner to enter keys
First you need to enter the emulation system. How to do this - you can also find out on the Web, because. for different receiver models may be different ways. Most often, the entrance to the emulation is the introduction of a certain set of numbers on the remote control, for example - 9339, 9766, 9976, 9776. Such sets of numbers are relevant for Globo, Orton-4100 (7010, etc.) tuners.
Immediately after the introduction of a valid key in the electronics of the tuner, the option to configure the receivers, its channels and signals will be activated.
window title in different models miscellaneous - "CA-settings", "EMU", etc. It is in this window that you need to continue performing manipulations.
Introduction of BISS keys to the tuner
In the emulator, find the "Key Edit" or "Key Edit" section, enter it.
Look for the string "BISS" or "BISS". Click on it, a window with different codes will open. If no one has entered codes there before, then the window will be empty.
Enter the channel frequency, its ID and BISS keys. All this information can be easily found on the Internet. When searching, pay attention to which satellite is being used.
The ID data is entered in the "Serv ID" column. BISS keys are entered in the "Key Data" column. Channel frequency - in the "Freg" column.
To enter this data, they usually do not use arrows, but buttons of different colors on the remote control - red, yellow, green, etc.
Useful
How to enterBISS-keys in tuners "Opticum — 9500 HD" and "Orton – 9500 HD»
If there is no BISS encoding in the key editor, then you need to enter the numbers 9339 from the remote control on any channel. After that, go to the “Code Editor” submenu, then to the BISS encoding menu. Press the green button to add a new key.
Enter parameters:
- caid - leave encoding identifier;
- BISS-2600
- ID - SID of the channel.
- frequency of the transponder from which the channel broadcasts in BISS encoding.
The key itself is entered in the “key data” item, and checksums can be omitted, the device will calculate them by itself. If the key consists of 6 pairs, then you need to enter 3 pairs, then 00, then 3 more pairs and again 00. To enter the key, use the up / down buttons on the remote control, or enter letters using the number buttons on the remote control.
Today, almost every modern tuner provides the ability to entering BISS keys (decoding) satellite channels. The so-called emulator (EMU) is responsible for this procedure, which stores a list of biss keys, keys of other encodings from encrypted channels. Depending on the firmware version and receiver model, the list of supported encodings may vary, but the most common encodings are: Viaccess, BISS, Cryptoworks, Nagravizion, Mediaquard, Irdeto.
The procedure for entering the emulator and entering biss keys in different models can be radically different from each other. Basically, this operation can be done using the remote control, provided that you have information on how to enter biss keys in your tuner. There is also a tuner where you can change or add a new biss key, you can only use a computer and a specific software to work with your satellite receiver model.
One of the most common encodings used in the emulator is biss. biss encoding is easily entered into the emulator, and most importantly, about 10-20 Ukrainian-Russian language channels use this encoding (depending on which satellites you receive), and even find biss code list simply.
Entering BISS keys
This table provides instructions input biss keys to certain tuner models. If you did not find the model that interests you, leave a request in the reviews, and we will try to add it.
Entering biss GLOBO keys |
| Entry of biss keys GLOBO 4100C |
| Entry of biss keys GLOBO 3000/4000/5000/6000 series |
| Entry of biss keys DIGITAL 4000/4100 |
| Entry of biss keys OPTICUM 4000/4100 |
Entering biss keys ORTON |
| Entry of biss keys ORTON 4100c |
Entering biss keys OPENBOX |
| Entering biss keys Openbox F300 |
| Entering biss keys Openbox X800 |
| Entering biss keys Openbox X810 |
| Entering biss keys Openbox X820 |
| Entering Biss Keys Openbox S2 mini HD |
Entering biss keys Gi (Galaxy Innovations) |