If the screen has become black and white in Windows 10, this may automatically awaken some users' nostalgia for monochrome monitors.

Of course, this is an unusual, long-forgotten effect, but it needs to be corrected, since most modern software may simply refuse to work with it.
Therefore, you need to know what to do: the screen has turned black and white?

Fixing the crash

The vast majority of cases are black and white Windows screen 10 can be observed when changing the color filter settings. It shouldn't be too difficult to straighten out:

1. Go to operating system settings.
2. Select special features. They contain a menu responsible for color parameters.
3. On the right side of the screen, find the function that is responsible for the color filter. Deactivate it using a special slider.

By the way, you can do everything even faster if you use the following combination of buttons on the keyboard: “Vin”, “CTRL” and “C”. Works both ways.

Some people like to dig into system registry. If your computer screen turns black and white, you can use this tool:

1. Use the combination of “Win” and “R” to activate the “Run” window. Use "regedit" in it.
2. Go to the following address: HKEY_CURRENT_USER\Software\Microsoft\ColorFiltering.
3. Pay attention to the right side of the window. To deactivate the filter, set the value of the “Active” function to “0”.

Often these methods are enough. But not always. Sometimes the reason may lie in a conflict with the video card drivers being used.

In this case:

1. Go to Device Manager.
2. You need to find equipment.
3. Right-click on the name.
4. Open "Properties".
5. Update files if they are broken or out of date. Roll back to the previous version if it was the update that triggered the occurrence of an unusual condition.

Also, do not forget that someone (for example, a child) could play with the settings of the monitor itself. They can be reset to their original values, according to the manufacturer's instructions.

An equally common situation: some new software is being installed. After its activation, this appearance is observed. There are several ways out of the situation: try changing the settings of the program itself, remove it from hard drive and look for an alternative - fortunately, in most cases, there are enough analogues.

Press Win + Ctrl + C.

Step by step instructions

1. Click the button Start and select Options.

2. Go to section Special features.

3. Select a tab Color and high contrast and turn the switch to position Off

What was that

I've had this problem twice already: in Windows 10 everything became black and white. I started looking for a solution on the Internet for the query “How to disable night mode,” because I personally turned it on, to find out what kind of new feature this is for editors. But I didn't find a solution. Because that's not what I was looking for. I tried making changes to the registry and so on - nothing helped. I had to create another one account on the same computer.

But, after a while, the same thing happened to the new account: the desktop and all non-Windows applications - all the images became black and white. Only this time I didn’t turn on anything, it happened spontaneously (or maybe my son pressed something). In general, I worked in black and white mode all day. For typing, this may be a useful feature, but for my work it is not very useful.

What to do if suddenly the screen of your computer or laptop turns black and white? There can be many reasons for this, for example, a cat ran across the keyboard while you were leaving for tea. But, fortunately, in most cases the problem can be solved in 3 seconds. How? The most well-known ways to disable black and white mode in Windows are detailed below:

How to turn off black and white mode using hot keys

The easiest way to disable the black and white screen display mode is to hold down the key combination:

Windows +CTRL +C

The same combination is enough to switch the profile to b/w mode.

In most cases this solves the problem with black and white screen at any Windows versions (10, 7, 8.1)

Disabling the black and white filter through settings

If the key combination does not work and the question “why the screen turned black and white on Windows 10” is still relevant, then you need to start typing the phrase “Color filter options” in the Start search bar and select the specified item in the search results.

After clicking on the sun icon you will be taken to the screen color settings window

All you have to do is click on the “Enable color filters” slider

Here you can uncheck the box to allow the use of keyboard shortcuts so that this does not happen again by accident.

Setting up the video card driver

This case is less common because it is very difficult to accidentally change the gamma and you should resort to this method if the above methods did not work.

To get to the video card settings panel you need to:

1.Right-click on an empty area of ​​the desktop

2.Select “Panel NVIDIA management”, “AMD Radeon Settings”, “AMD Radeon Settings”, “Intel HD graphics”. Depending on the manufacturer of the video card, if you have difficulty identifying it, use the instructions in your computer or laptop.

3.Adjust color options using the palette and intensity sliders

4.Reinstall the video card driver or reset the profile settings to default settings

Monitor settings

This option is possible if booting Windows On the boot screen and in the BIOS the image is also black and white. If the image is color, but in Windows it is black and white, then there is a software failure and one of the above methods will help you. If the image is always non-colored, even when connecting other devices (set-top box, another computer, laptop, etc.), then you need to edit the monitor’s color profile or contact the service; this may be a problem with the monitor itself, which cannot be solved at home.

Yesterday, an acquaintance called me and told me that his colleagues were making fun of him. Returning from lunch, the man discovered that the screen in the Windows 10 interface had become black and white. He went through all the screen settings and personalization inside and out, couldn’t do anything, and eventually turned to me for help.
The reasons for this phenomenon can be software or hardware. In this case, the reason that the interface lost color was the activated color filter.

In the top ten, the developers made this function specifically for those who work with photos and videos. In this case, the filter will be active even after restarting the computer. So if Windows 10 suddenly turns black and white for you, start by opening System Settings and going to the “Accessibility” section:

In the section menu, find the “Color Filters” section. To make the system interface color again, slide the switch Enable color filters in meaning Off.

If you are a designer or photographer and you need this option, then there is a special key combination just for you: Win+Ctrl+C. With its help, you can enable or disable filters at any time. The main thing is to check the box “Allow using keyboard shortcuts”.

If it's not the filter

In cases where the Windows screen has turned black and white, and color filters have nothing to do with it, the reason most often needs to be looked for in the video card and the cable from it to the monitor.
Try updating the video adapter driver and, if this does not help, connect another monitor using the same cable to check. Ask where to get it? With friends, acquaintances or neighbors!
If the monitor screen is still black and white, then there is only one way out - try changing the video card, since 99% of the time it is the culprit of the trouble.

When you use Windows 10 and press a lot of keys on your keyboard without paying much attention to it, you can cause the screen to turn black and white. This happens unexpectedly, since you did not do anything special for this except pressing some keys.

Sometimes when using the Windows 10 operating system, you may notice that the screen has switched from color mode to black and white or began to show in shades of gray, as in the screenshot above. Checking the monitor connection, restarting the computer, updating video card drivers and other actions do not help.

Fortunately, the solution to this problem is very quick and simple. You don't have to waste time on reinstalling Windows 10 or driver update. You just need to turn off color filters.

Color filters are new feature, which recently appeared in operating system Windows 10, with which you can change the color scheme used on your screen. Color filters are applied at the system level, so they work with any application. This is made for people with vision problems so that they can better see what is happening on the screen.

How to disable Windows 10 color filters

The easiest way to disable color filters is to press the key combination Windows+CTRL+C. Your screen will return to color. If you press again Windows+CTRL+C, the screen will return to black and white. This key combination turns screen color filters on and off.

You can also use the Windows 10 settings menu to disable the color filter. To do this, open the Settings section in Start (gear icon) and go to the Accessibility section. Then, in the left column, select “Color and High Contrast.”

On the right side of the settings, find the “Apply color filter” switch and set it to inactive mode.

The screen now displays all colors.

Why does black and white mode turn on?

This happened by accident because you clicked Windows+CTRL+C and activated the gray color filter in Windows 10. As you can see, disabling this filter is easy and simple.

If you liked this lesson or have any questions, write in the comments!