Profession "Electrician for power networks and electrical equipment": training, responsibilities, job description. Electrician for power networks and electrical equipment. etc. Electrical installation of power networks and electrical equipment

DESCRIPTION OF THE PROFESSION

The development of the Russian economy is based on electricity. There is no point in listing industries and enterprises that would survive without electricity. They simply don't exist. This means that none of them will be able to work without electricians of electrical networks and electrical equipment. It depends on the electricians what condition the overhead and cable lines will be in, and they are the first to rush to the rescue where various accidents and breaks occur. High quality The work of specialists depends on their ability to correctly and quickly connect individual sections of the chain into a whole organism.

The profession “Electrician of electrical networks and electrical equipment” is on the list of the most highly paid and in demand. Specialists install complex, high-tech electrical equipment in production, do wiring in homes, and lay overhead and ground cables. The range of work for electricians is expanding, because every year new directions for the development of this field appear.

Modern construction production is unthinkable without significant volumes of work performed by electricians. The role of installers in the construction of industrial enterprises and other facilities is increasing. The profession “Assembler” is the oldest; it received its name from the French word of the same name “installation” - lifting, installing and assembling any product. Today "installation" in in a broad sense this word means the assembly and installation of various building structures into the design position, technological equipment, devices, machines, mechanisms, instruments and their assembly units (units, units and blocks) from finished products.

The development of science and technology, as well as the industrialization of industrial production, has identified three main areas of modern installation: installation of building structures general purpose(construction of buildings, construction production); installation of technological equipment, special steel and reinforced concrete structures, lifting and transport equipment, construction machines and mechanisms (special construction and installation works (CEM) - installation production); installation of apparatus (except for petrochemical production and process automation equipment) and instruments (except for control and measuring instruments, the installation of which does not relate to installation production) - assembly production.

In the recent past best qualities workers were considered to have a large back, strong arms and legs, and skillful use of tools. New technologies and modernization of production have radically transformed the work of modern workers. Becoming physically easier from year to year, their work increasingly acquires a scientific, technical and creative character. The profession “Electrician of electrical networks and electrical equipment” is no exception. A modern specialist uses various machines, mechanisms and devices in his work, so he must know the principle of operation of machines and their structure, be able to read drawings and diagrams, understand technical documentation, perform a variety of simple technical calculations and much more.

This profession constantly requires from workers extreme composure, absolute attention, balance, composure, high personal discipline and personal responsibility. The profession “Electrician of electrical networks and electrical equipment” contains many elements of engineering and technical work. Even with well-prepared technical documentation and a clear organization of work, the installer is often forced to solve complex technical issues, so a low level of education, poor special training and professional culture of the worker have the same negative impact on production as backward technology, outdated machines and poor labor organization.

MORE ABOUT THE PROFESSION


Direction of preparation:


Architecture and construction

Purpose of the profession:


- performing work on installation of electrical wiring of all types;
- repair of lighting networks and equipment;
- installation of cable lines various types;
- implementation of various types of connecting electrical wiring; installation, connection and repair of switchgears, secondary circuit devices;
- checking the quality of work performed.

Must know:


- basics of the installed equipment, electrical circuits varying degrees of complexity;
- methods for measuring insulation resistance;
- methods of marking steel and plastic pipes, cables and bends;
- rules for slinging and moving equipment;
- methods of installation of switchgears, typical faults lighting network and equipment;
- methods and technical means of finding the location of electrical wiring damage;
- technology for laying cable lines;
- composition and content of technical documentation for electrical installation work.

Should be able to:


- carry out installation work on electrical wiring of all types; repair cables;
- fulfill Various types connecting electrical wiring;
- install and connect distribution devices, devices and devices of secondary circuits;
- check the quality and reliability of installation of switchgear and secondary circuits.

Professionally important qualities:


- spatial imagination;
- developed technical thinking;
- developed motor, verbal, visual, operational memory;
- physical health.

Medical contraindications:


- diseases of the musculoskeletal system;
- diseases of the respiratory system, digestive organs;
- impaired coordination of movements;
- visual impairment.

Characteristics of work. Installation and sealing of fastening parts. Installation of brackets, hooks, structures for magnetic starters. Removal of the top jute cover of the cable manually. Production of small fastening parts and gaskets that do not require precise dimensions. Manually driving in grounding electrodes. Painting of cables and grounding bars. Punching nests, holes and grooves according to the finished markings manually.

Must know: main brands of wires and cables; assortment of non-ferrous and ferrous metals; basic materials used in the manufacture and installation of electrical structures; main types of tools used for electrical installation work; simple electrical wiring diagrams.

§ 439. Electrician for power networks and electrical equipment of the 3rd category

Characteristics of work. Cutting cables with voltages up to 10 kV by temporarily sealing the ends. Sealing passages for various types of wiring and busbars through walls and ceilings. Installation of grounding networks and neutralizing devices. Painting of equipment and buses (except for grounding buses). Dismantling of distribution points (cabinets) of closed or open type. Dismantling of simple ballasts and devices. Welding of grounding bars and welding them to brackets and fastening parts. Treatment of welding areas using a mechanized method. Punching holes with power tools. Installing lighting boxes for cables. Procurement of materials and equipment for electrical installation work in residential, cultural and administrative buildings.

Must know: main types of fasteners; arrangement of simple instruments, electrical devices and used electrified and pneumatic tools; simple electrical wiring diagrams; devices and rules for using simple rigging equipment; types of welding equipment used in electrical installation work and rules for their use; rules for assembling materials and equipment for performing electrical installation work in residential, cultural and administrative buildings.

§ 440. Electrician for power networks and electrical equipment of the 4th category

Characteristics of work. Connection, termination and connection of wires and cables of various brands with a cross-section of up to 70 mm2 by all methods, except welding. Installation of protective devices for casings and fences. Marking of laid pipes, cables and bends. Fastening structures and devices using mounting guns. Crimping of tips in an explosion chamber. Soldering lugs to cable and wire cores. Checking and adjusting electromagnetic current and voltage relays. Installation of brackets and metal support structures. Fastening structures by gluing. Installation of structures for cable wiring. Laying steel and plastic pipes in furrows, floors, walls, trusses and columns. Laying cable trays and perforated mounting profiles. Procurement of materials and equipment for electrical installation work in industrial buildings and engineering structures. Installation according to ready-made markings of input and distribution boxes, panels, traffic lights, rheostats, regulators, controllers, travel and limit switches, resistance boxes, boxes with low-voltage equipment, input and branch boxes for closed distribution busbars and other similar equipment weighing up to 50 kg. Filling of equipment and draining of oil. Installation of troll holders and clicks. Measuring the insulation resistance of electrical equipment, cables and wires.

Must know: arrangement of mounted electrical equipment; methods for measuring insulation resistance; electrical wiring diagrams; methods of connection, termination and attachment of wires and cores of cables of various brands with a cross-section of up to 70 mm2; methods for marking steel and plastic pipes, cables and bends; rules for slinging and moving equipment; devices and methods of using mechanized rigging equipment; installation guns and rules for their care; methods of installation of switchgears; main components and parts of transformers; rules for assembling materials and equipment for performing electrical installation work in industrial buildings and engineering structures.

§ 441. Electrician for power networks and electrical equipment of the 5th category

Characteristics of work. Marking of installation sites and installation of start-control and signaling equipment and devices of power supply and distribution points, panels, control panels of mechanisms, traffic lights, rheostats, remote control regulators, controllers, travel limit switches, resistance boxes, brake magnets, boxes of low-voltage equipment and other similar equipment weighing up to 100 kg. Installation of instruments and apparatus equipped with recording devices. Installation of closed and open trunk, distribution, lighting and trolley busbars with a cross-section of up to 800 mm2. Filtration and drying of transformer oil. Testing remote control circuits for motors with alarms, switching on active and reactive energy meters. Regulation of starters, contactors, oil switch drives and other control equipment. Laying pipes in packages and blocks weighing up to 500 kg. Laying pipelines in the foundations and ceilings of machine rooms and rolling mills.

Must know: methods of inspection, drying and testing of electrical equipment; rules for marking installation sites for supporting structures, equipment and routes for laying wires, cables and buses; rules for taking measurements and drawing up sketches of individual wiring assemblies, structures, assemblies and units of electrical equipment for production at stands and in workshops; rules for the assembly and fastening of closed and open trunk, distribution, lighting and trolley busbars; the order of phasing of completed wiring and methods for checking completed electrical wiring diagrams; insulation characteristics of transformers.

§ 442. Electrician for power networks and electrical equipment, 6th category

Characteristics of work. Marking the main axes of installation sites for structures and electrical equipment. Installation of electrical equipment weighing more than 100 kg. Installation of control station distribution boards (including semiconductors), cabinets with high-voltage equipment, electric precipitators. Installation of open busbars and trolleys with a cross-section of more than 800 mm2. Laying blocks from pipes weighing more than 500 kg. Installation of power electrical equipment in explosive areas, testing and regulation of this equipment. Installation of busbars for electrolysis baths. Reassembly and installation of mercury, silicon and other rectifiers and related electrical equipment and fore-vacuum pumps. Taking measurements and drawing up sketches for the installation of particularly complex power wiring, instruments, apparatus and individual electrical equipment units.

Must know: methods of cutting and installation of high-voltage, control and special cables; designs of distribution boards, consoles, control and protection panels, station units; electrical circuits, methods of testing and regulating electrical equipment; technical characteristics of transformers; installation of electrical installations; technical conditions for putting objects into operation; rules for performing work in explosive zones; basics of relay protection.

Secondary vocational education required.

I CONFIRM:

________________________

[Job title]

________________________

________________________

[Name of company]

________________/[FULL NAME.]/

"____" ____________ 20__

JOB DESCRIPTION

Electrician for power networks and electrical equipment, 4th category

1. General Provisions

1.1. Real job description defines and regulates the powers, functional and job responsibilities, rights and responsibilities of an electrician for power networks and electrical equipment of the 4th category [Name of the organization in the genitive case] (hereinafter referred to as the Company).

1.2. An electrician for power networks and electrical equipment of the 4th category is appointed to the position and dismissed from the position in the manner established by the current labor legislation by order of the head of the Company.

1.3. An electrician for power networks and electrical equipment of the 4th category belongs to the category of workers and reports directly to [name of the position of the immediate supervisor in the dative case] of the Company.

1.4. An electrician for power networks and electrical equipment of the 4th category is responsible for:

  • timely and high-quality performance of tasks as intended;
  • compliance with performance and labor discipline;
  • compliance with labor safety measures, maintaining order, compliance with fire safety rules in the assigned work area (workplace).

1.5. A person with secondary vocational education in this specialty and at least 1 year of work experience is appointed to the position of electrician for power networks and electrical equipment of the 4th category.

1.6. IN practical activities An electrician for power networks and electrical equipment of the 4th category must be guided by:

  • local acts and organizational and administrative documents of the Company;
  • internal labor regulations;
  • rules of labor protection and safety, ensuring industrial sanitation and fire protection;
  • instructions, orders, decisions and instructions from the immediate supervisor;
  • this job description.

1.7. An electrician for power networks and electrical equipment of the 4th category must know:

  • arrangement of mounted electrical equipment;
  • methods for measuring insulation resistance;
  • electrical wiring diagrams;
  • methods of connecting, terminating and attaching wires and cores of cables of various brands with a cross-section of up to 70 mm 2;
  • methods for marking steel and plastic pipes, cables and bends;
  • rules for slinging and moving equipment;
  • device and methods of using mechanized rigging equipment;
  • construction of mounting guns and rules for their care;
  • methods of installation of switchgears;
  • main components and parts of transformers;
  • rules for assembling materials and equipment for performing electrical installation work in industrial buildings and engineering structures.

1.8. During the period of temporary absence of an electrician for power networks and electrical equipment of the 4th category, his duties are assigned to [deputy position title].

2. Job responsibilities

An electrician for power networks and electrical equipment of the 4th category performs the following labor functions:

2.1. Connection, termination and attachment of wires and cables of various brands with a cross-section of up to 70 mm 2 by all methods, except welding.

2.2. Installation of protective devices for casings and fences.

2.3. Marking of laid pipes, cables and bends.

2.4. Fastening structures and devices using mounting guns.

2.5. Crimping of tips in the explosion chamber.

2.6. Soldering lugs to cable and wire cores.

2.7. Checking and adjusting electromagnetic current and voltage relays.

2.8. Installation of brackets and metal support structures.

2.9. Fastening structures by gluing.

2.10. Installation of structures for cable wiring.

2.11. Laying steel and plastic pipes in furrows, floors, walls, trusses and columns.

2.12. Laying cable trays and perforated mounting profiles.

2.13. Procurement of materials and equipment for electrical installation work in industrial buildings and engineering structures.

2.14. Installation according to ready-made markings of inlet and distribution boxes, panels, traffic lights, rheostats, regulators, controllers, travel and limit switches, resistance boxes, boxes with low-voltage equipment, inlet and branch boxes for closed distribution busbars and other similar equipment weighing up to 50 kilograms.

2.15. Filling equipment and draining oil.

2.16. Installation of troll holders and clicks.

2.17. Measuring the insulation resistance of electrical equipment, cables and wires.

In case of official necessity, an electrician for power networks and electrical equipment of the 4th category may be involved in performing duties overtime, in the manner prescribed by law.

3. Rights

An electrician for power networks and electrical equipment of the 4th category has the right to:

3.1. Get acquainted with draft decisions of the enterprise management concerning its activities.

3.2. Submit proposals for improvement of work related to the responsibilities provided for by this job description for management's consideration.

3.3. Inform your immediate supervisor about all shortcomings in the production activities of the enterprise (its structural divisions) identified during the performance of your official duties and make proposals for their elimination.

3.4. Request personally or on behalf of the immediate supervisor from heads of departments of the enterprise and specialists information and documents necessary to perform their job duties.

3.5. Involve specialists from all (individual) structural divisions of the Company in solving the tasks assigned to him (if this is provided for by the regulations on structural divisions, if not, with the permission of the head of the Company).

3.6. Require the management of the enterprise to provide assistance in the performance of their official duties and rights.

4. Responsibility and performance evaluation

4.1. An electrician for power networks and electrical equipment of the 4th category bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation, criminal) responsibility for:

4.1.1. Failure to carry out or improperly carry out official instructions from the immediate supervisor.

4.1.2. Failure to perform or improper performance of one's job functions and assigned tasks.

4.1.3. Illegal use of granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the progress of the work assigned to him.

4.1.5. Failure to take measures to suppress identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to ensure compliance with labor discipline.

4.2. Assessment of the work of an electrician on power networks and electrical equipment of the 4th category is carried out:

4.2.1. By the immediate supervisor - regularly, in the course of the employee’s daily performance of his labor functions.

4.2.2. The certification commission of the enterprise - periodically, but at least once every two years, based on documented results of work for the evaluation period.

4.3. The main criterion for assessing the work of an electrician on power networks and electrical equipment of the 4th category is the quality, completeness and timeliness of his performance of the tasks provided for in these instructions.

5. Working conditions

5.1. The work schedule of an electrician for power networks and electrical equipment of the 4th category is determined in accordance with the internal labor regulations established by the Company.

5.2. Due to production needs, an electrician for power networks and electrical equipment of the 4th category is required to go on business trips (including local ones).

I have read the instructions on __________/___________/“____” _______ 20__.

I APPROVED
Supervisor "_____________"
_____________ (____________)
JOB DESCRIPTION
electrician for power networks and electrical equipment, 4th category
(for organizations performing construction,
installation, repair and construction work)
1. GENERAL PROVISIONS
1.1. This job description defines the functional responsibilities, rights and responsibilities of an electrician for power networks and electrical equipment of the 4th category "________________________" (hereinafter referred to as the "Organization").
1.2. An electrician for power networks and electrical equipment of the 4th category is appointed to the position and dismissed from the position in the manner established by the current labor legislation by order of the head of the Organization.
1.3. An electrician for power networks and electrical equipment of the 4th category reports directly to ____________________ Organization.
1.4. A person with ________ professional education and ____ years of work experience in the specialty is appointed to the position of electrician for power networks and electrical equipment of the 4th category (without presenting requirements for work experience).
1.5. An electrician for power networks and electrical equipment of the 4th category must know:
Fundamentals of installed electrical equipment.
Methods for measuring insulation resistance.
Electrical circuits of medium complexity.
Methods for connecting, terminating and joining wires and cores of cables of all brands with a cross-section of up to 70 mm2.
Methods for marking steel and plastic pipes, cables and bends.
Rules for slinging and moving equipment.
Device and methods of using mechanized rigging equipment.
The design of assembly-piston guns and the rules for caring for them.
Methods of installation of switchgears.
Main components and parts of transformers.
Rules for assembling materials and equipment for performing electrical installation work in industrial buildings and engineering structures.
1.6. During the period of temporary absence of an electrician for power networks and electrical equipment of the 4th category, his duties are assigned to ___________________________.
2. FUNCTIONAL RESPONSIBILITIES
An electrician for power networks and electrical equipment of the 4th category carries out work of average complexity during the installation of power networks and electrical equipment.
Approximate types of work.
Connection, termination and connection of wires and cables of all brands with a cross-section of up to 70 mm2 by all methods, except welding.
Installation of protective devices for casings and fences.
Marking of laid pipes, cables and bends.
Fastening structures and devices using a piston mounting gun.
Crimping of tips in the explosion chamber.
Soldering lugs to cable and wire cores.
Checking and adjusting electromagnetic current and voltage relays.
Installation of brackets and metal support structures. Fastening structures by gluing.
Installation of structures for cable wiring.
Laying steel and plastic pipes in furrows, floors, walls, trusses and columns.
Laying cable trays and perforated mounting profiles.
Procurement of materials and equipment for electrical installation work in industrial buildings and engineering structures.
Installation according to ready-made markings of input and distribution boxes, panels, traffic lights, rheostats, regulators, controllers, travel and limit switches, resistance boxes, boxes with low-voltage equipment, input and branch boxes for closed distribution busbars and other similar equipment weighing up to 50 kg.
Filling equipment with oil and draining oil.
Installation of trolley holders and clicks.
Measuring the insulation resistance of electrical equipment, cables and wires.
3. RIGHTS
An electrician for power networks and electrical equipment of the 4th category has the right to:
3.1. Request and receive the necessary materials and documents related to the activities of an electrician on power networks and electrical equipment of the 4th category.
3.2. Enter into relationships with departments of third-party institutions and organizations to resolve operational issues of production activities that are within the competence of an electrician for power networks and electrical equipment of the 4th category.
4. RESPONSIBILITY
An electrician for power networks and electrical equipment of the 4th category is responsible for:
4.1. Failure to fulfill one's functional duties.
4.2. Inaccurate information about the status of the work.
4.3. Failure to comply with orders, instructions and instructions from the head of the Organization.
4.4. Failure to take measures to suppress identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise and its employees.
4.5. Failure to ensure compliance with labor discipline.
5. WORKING CONDITIONS
5.1. The work schedule of an electrician for power networks and electrical equipment of the 4th category is determined in accordance with the Internal Labor Regulations established in the Organization.
5.2. Due to production needs, an electrician for power networks and electrical equipment of the 4th category is required to go on business trips (including local ones).

I have read the instructions __________________/_________________/
(signature)

The profession “Electrician for power networks and electrical equipment” appeared almost immediately after electricity began to enter the everyday life of mankind. This is directly related to the fact that lighting and someone needed to be served. Today, such specialists arrange the supply of electrical wiring and lighting in residential and industrial buildings, install transformers and electric motors, and also install overhead and ground cable power supply lines.

Basic information about the profession

An electrician for power networks and electrical equipment is a skilled worker involved in the installation and installation of equipment, wiring of electronic circuits and networks to ensure normal living and working conditions in urban and rural areas. This is a very responsible profession, because inattention and mistakes can lead to big problems, including fires, explosions and other negative consequences that can harm human health and material objects.

The main feature of an electrician’s work on power networks and electrical equipment is that the master must move from one object to another. Most often, workers work in pairs or in entire teams. The main skills required for high-quality work are good vision, sensitive hands, clear coordination of movements, imagination and technical thinking. Access level different types assignments depends on the rank the specialist received.

Electrician of the second category

An electrician for electrical equipment for power and lighting networks who has received the second category can install and seal fasteners, brackets, hooks, as well as fastening structures intended for magnetic starters. They are allowed to manually remove cable coverings and independently produce parts that do not require precise dimensions. Specialists of this category are tasked with punching sockets and other holes after a senior employee makes the markings.

The training of an electrician in power networks and electrical equipment of the second category should include knowledge of the brands of cables and wiring, and the main range of metals used in electrical appliances.

Electrician of the third category

A specialist of this category is entrusted with cutting cables with a voltage not exceeding ten kilowatts and processing its edges. Also included in power networks and electrical equipment is the sealing of holes for grounding and wiring passing through the walls of buildings. He has the right to install grounding, paint equipment, and dismantle distribution cabinets of various types. In addition, his responsibilities may include dismantling simple ballast equipment. He can be entrusted with welding work with grounding buses and fastening structures, followed by their subsequent mechanized processing. His responsibilities include creating holes for them, sorting equipment and materials before carrying out work in buildings different types.

An electrician's knowledge of power networks and electrical equipment of the third category must include types of fasteners, how simple devices, devices and tools that operate on electricity are constructed. He must know wiring diagrams and technical type, how to operate rigging equipment, what types of welding equipment there are, how to work with it. He must also understand the rules for assembling equipment for work in different types of buildings.

Electrician of the fourth category

The job description of an electrician for power networks and electrical equipment of category 4 includes responsibilities, including working with wires and cables in all ways, in addition to welding; the most different brands with a cross-section not exceeding 70 millimeters square. He may be tasked with installing fences and protective enclosures. His responsibilities include marking equipment, fastening devices using a mounting gun, soldering work with cables and wires, adjusting and checking the voltage in the network, installing support-type structures, including the gluing method.

In addition, a specialist may be entrusted with the installation of structures intended for cable-type wiring, installation of steel and plastic pipes for conducting communications inside buildings. He can be engaged in the assembly of devices and materials for work by specialists in industrial and engineering buildings. Such a specialist has the right to install panels, traffic lights, boxes, boxes and other equipment according to ready-made markings, if its weight does not exceed fifty kilograms. He may be tasked with measuring the resistance of insulating materials in equipment, wiring and cables.

An electrician for power networks and electrical equipment must know the structure of the electrical equipment he is installing, all the methods for measuring insulation resistance, how pipes and wiring are marked, etc.

Electrician of the fifth category

The responsibilities of an employee with the fifth category include marking out places where all the equipment necessary to provide the building with electricity and related equipment will be installed and assembled. The mass of the latter should not exceed one hundred kilograms. Also, his responsibilities may include installation of equipment, which includes recorders. In addition, he deals with different types, if their cross-section does not exceed 800 square millimeters. He is engaged in filtering and drying oil for transformers. His responsibilities include testing and trial runs of circuits with remote control, connecting various meters to the network. The specialist must be engaged in adjusting ballast equipment, laying pipes that do not exceed half a ton in weight, as well as laying pipes in the foundations of buildings.

It is worth paying special attention to methods of inspection and other work with electrical equipment, marking rules, taking measurements and creating sketches. An electrician must know how to assemble and secure open and closed lines, distributors, etc. electrical equipment. This list includes knowledge of the circuit structure and insulation characteristics of transformers.

Electrician of the sixth category

An electrician for power networks and electrical equipment of the sixth category must mark the places where electrical equipment and other structures will be installed. He can install devices that weigh more than one hundred kilograms, including cabinets equipped with high-voltage equipment and filters. He also installs busbars with a cross-section exceeding 800 square millimeters, and installs pipe blocks heavier than 500 kilograms.

His responsibilities include installing power equipment in areas where there is a risk of explosion, as well as checking and adjusting these devices. He must be involved in overhauling, as well as installing pumps of various types, taking measurements and creating sketches of complex power devices and wiring. Among the knowledge, a specialist of this category must have all the information necessary for him to perform his job duties. Such a specialist has at least secondary specialized education.

Rights

The electrician's instructions on power networks and electrical equipment imply that he has the right to manage and give instructions to his employees depending on his duties. Monitor the implementation of instructions, request materials and documentation necessary for its work. In addition, he can interact with other services if necessary, get acquainted with management plans if they relate to the activities of his departments. If he has ideas on how to make his work more perfect, he has the right to propose them to management. If his employees have distinguished themselves, the specialist can offer management encouragement for their actions, as well as holding them accountable for violations of the labor process. He has the right to inform management about any violations that he discovered during his work.

Responsibility

An employee in this position is responsible for the improper performance of his functions if he violated the rules of the enterprise and did not fulfill his duties. He is also responsible for the fact that he did not transfer authority in a timely manner after dismissal from office, for any offenses, taking into account the legislation of the country, for causing material damage to the enterprise, for non-compliance with the instructions and rules of the organization, etc.

Conclusion

The profession "Electrician for power networks and electrical equipment" is in demand in modern society. However, it is one of the dangerous ones. The specialty requires attentiveness, perseverance and the presence of important skills necessary for safe execution worker functions.

RELATED ARTICLES