The work of the MS Word program is not limited to a text editor; mathematical operations with a variety of numerical data are also in great demand. In the article we will analyze in detail and clearly show how to put a degree in Word using, for example, superscripts.

Superscript and subscript

The “Main” menu with “superscript” and “subscript” will help you easily and quickly raise a number to a power and write a letter with an index. Initially, you need to open the “Home” tab in the main Word panel. Therefore, it is important to indicate with the cursor the place where the number in the square should be, and then activate the “Superscript” button by pressing (the function will be active if it lights up yellow). All that remains is to enter the required number. We look at the picture below and compare what actions need to be done sequentially.

In order to exit the “Superscript” mode, you just need to press the X 2 button and make sure that it does not light up yellow. Otherwise, this is what happens.

So, the point of how to square X is clear. Now you can easily write any quantities and numbers in a square, such as: m2, m3, cm2, km2.

Let's look at the subscript option if you suddenly need to write a variable with a subscript. For example, like here, you need a small subscript:

Probably an advanced user has noticed a hotkey for the subscript, but if not, then let's look at this issue. Everything is on the same main Word panel, there is a “Home” tab, on it there are two buttons - X 2 and X 2. In this case, consider X 2. Using this button, you can simply print any variable; the procedure is no different from the variant discussed above. The second step changes, instead of the sign X 2 (which will allow you to write a number above the number or letter) on the main panel, select the sign X 2 i.e. “Subscript” (with which you can write a subscript in a second). Let's look at the example below carefully at each step in turn.

Attention! Be sure to repeat step 2 (see picture), otherwise everything further printed will be written in a subscript. The Subscript button should not glow yellow.

Superscript and subscript in Word 2003

You can place an index or degree in Word 2003 above a number, word or letter using the following steps. The sequence of actions is very important:

1) You need to write a number, or maybe a whole word (number or letter), which should be indicated in a square or simply put an index. Select.

2) Right-click on the selected fragment and select “Font” in the drop-down window.

3) Check the box in the window that opens for the desired mode – “Superscript” or “Subscript”.

4) Don’t forget to go to the “Font” item and uncheck the previously selected mode.

This option will also work in Word 2007, 2010, 2013 and 2016.

Using the "Formula"

In versions of Word 2007, 2010, 2013 and 2016, using the “Formula” button, you can quickly add an index or degree to a mathematical equation or formula.

Go to the “Insert” section, select “Formula”.

Use the left and right buttons to move from square to square; such actions will help you insert the necessary numbers and letters. After all the steps, click on the blank sheet and the equation is ready. Using the same principle, we write a number with a degree at the bottom, all steps are the same, only when choosing an index you need to select “Lower index”.

There is another way to put a degree in Word, using the following key combination: Ctrl + Shift and + (it won’t work on the number pad).

Not only engineers and mathematicians work with degrees; they are often used in units of measurement, for example, square meters. Many people simply write a number next to the indicator, however, this is incorrect, especially since the office suite has many built-in tools. This article will try to explain, how to put a degree in word.

Using a superscript

This function is available from the font options panel. After clicking on the icon, the characters will be written in superscript style. The main thing here is to type the text carefully, since the error may not be noticeable, and do not forget to turn off the special mode after writing the degree. The best option would be to write the text in a regular font, and then make it superscript by highlighting it and clicking on the button.

Modifying font settings

Editor tools allow you to create your own fonts, you can also use them put the degree in Word. You should use this method if the user does not like the standard style of superscript text, for example, you want to make it underlined or bold. In the menu, you must check the box next to the “superscript” item, only in this case the desired result will be achieved. Most of the parameters do not need additional explanation, it is only worth noting that the size of superscript and regular fonts will be different, even if the value is set to the same.

You can even write a whole sentence this way, but sometimes after pressing the spacebar the font may revert to the original one. In this case, you should add spaces to the whole text after you have completed writing it.

Using the Formula Builder

This is the most functional method and is also suitable for frequent use. You can access the editor through the “Insert” menu, there you should select “Formula”, the following tab will appear, templates allow you to arrange the inscription in many different ways, however, for the average user such broad functionality is unnecessary. In addition, the formula is inserted as a picture, so it cannot be edited; if you need to change the data, you will have to create a new one.

Regular text is located on a line at the same level. The need to change the level of writing arises when you need to:

• include in the text a mathematical formula with numbers raised to a power (x squared – x 2);
• dial the degree sign (36 0 C);
• enter into the text the designations of some units of measurement: measures of area, volume (25 square meters = 25 m 2);
• enter chemical formulas (CO 2).

The ability to set a superscript or subscript degree is available in every version of a text editor, even in the long-outdated Word 2003.

Moreover, every office application allows you to set the degree sign, any superscript or subscript symbol in several ways.

3 ways to make a degree sign in Word

There are three main ways to set a superscript or subscript in a text, making the text or a mathematical or chemical formula clear and readable. The result will be the same, only the algorithm differs, so everyone can choose the most convenient one for themselves.

Put the degree in the “Font” window

You can set the power of a number using the “superscript” and “subscript” buttons located on the main panel in the “Font” window.

To enter into text a number raised to a power (for example, “2 3”), you need:

1. Enter the required number “2”;
2. Without a space after it, enter the required value “3”;
3. Select the number of interest and press the “superscript” button. The number will automatically move above the text reference line (2 3).

Subscript characters are entered in the same way - just press the desired button.

You can write the degree at the top in another way:

1. Enter the numbers “2” and “3” without a space.
2. Select the number of interest and press the SHIFT and F10 keys or right-click and select the “Font” tab in the drop-down window.
3. Check the box you want - “superscript” or “subscript”.

Set the degree using hotkeys

For the most advanced users, I advise you to use hotkeys. You can write the degree at the top very quickly like this:

1. Enter the number “2” and the desired degree “3” without a space.
2. Select the number you want to raise to a power (in our case, “3”).
3. Press the “CTRL” “SHIFT” “+” keys simultaneously.

Degree sign set. Isn't it so much faster?

Using symbols

You can insert a degree using special characters. To do this you need:

1. Open the "Symbols" window on the "Insert" tab.
2. Select the desired superscript character.
3. Click the “Insert” button.

This algorithm is best used when you have to use the same symbols often. Then they are displayed in the “Previously Used Symbols” window. Searching for the degree sign in a general list may seem difficult, since the list contains a significant number of characters.

Each user chooses how to enter superscript degrees. Ultimately they all lead to the same result.

Anyone who has ever worked in the Word program knows how unique and universal it is in its own way. When working with this program, you may need to represent a number or even a word to a certain degree. This is easy to do, but it is worth considering all possible options.

To begin with, I would like to say that Word 2003 is already considered quite outdated, but still relevant among a number of users.

1. Select our number or word and right-click.
2. In the pop-up menu, select the “Font” item and click on it.
3. If necessary, select the font and size you need, and be sure to check the box next to “Superscript”.

That's all. Now, when writing, the font will rise up, and you can set the degree you need.

Degree in Word 2007 or higher

In Word 2007 and higher, everything has been greatly simplified.

By the way, you can use hot keys ctrl+shift+“+” and after that you will be able to immediately write in degrees, without once again turning to the toolbar.

Read also!

To get even more comfortable with Word, be sure to read. Vertical text in some documents also has to be inserted.

Often you need to convert PDF to Word. So that this is not a problem for you, read. Let's look at a couple of conversion methods.

How to make a frame in Word is written in . Often a frame in Word is required to make text more beautiful, but many do not know how this is implemented.

Ignorance of the basic principles of working with computers causes bewilderment among the generation of our grandparents. Or some people have to write not on paper, but in programs like Microsoft Word or similar. A natural question arises: “How to put a degree in Word?” This skill will also help students writing term papers in technical fields. After all, there it is often necessary to insert degrees and various formulas.

Preparation

First, you need to actually download the program itself, preferably on the new versions of 2016 or 2013. But if you already have it installed, then we will look at three main ways to write a number to a power in Word.

First way. Via the main panel

This is the easiest and most convenient way to set a degree in a Word document. To do this, you need to find “Superscript” on the “Home” tab. Right-click on it for the function to work. You can also execute a command by using the hotkey combination CTRL+SHIFT and pressing "+" on the keyboard

But before that, you must write some text or put numbers, and only after that click on “Superscript”. This is very convenient if you do not need to write voluminous formulas. We will consider what to do in this case below.

Second way. By inserting formulas

An ideal option for those who write a term paper or dissertation, and need to insert a lot of different formulas. Also suitable for office workers or technical website designers. And so, now we’ll learn how to write the degree at the top in Word using the formula.

To do this, go to the “Insert” field and in the upper right corner find the word “Formula”. Its size can be changed in accordance with the version of Word; right-click on it.

After clicking, a menu with formulas pops up. We select “Index” and a tab opens where we ask you to select the desired register. We find the inscription “Upper and lower indices”, click on the very first one on the left, when you move the mouse cursor the inscription “Upper index” is displayed.

After clicking, where there was “Place for formula”, two squares appear, one larger than the other. Enter the required number into the largest one, and the degree at the top.

Third way. Key combination

The simple combination ALT+X is easy to remember and will help you learn how to put a degree in Word. List of required actions:

• First, write the desired number or something else in a Word document.

• After writing, insert the code “00B2” and select it. It raises to the second power, therefore, in order to have a third, it is necessary to change the two to a three.

• Press ALT and X on your keyboard.

How to put a degree in Word 2003?

It's not as simple as in later versions. To raise a number to a power, you need:

1. Write the required text.
2. Enter any number you want to raise to a power.
3. Select it and right-click on it.
4. In the menu that opens, select the “Font” tab.
5. After which a window with font selections opens, where we need to select an item in the “Modification”, which is called “Superscript”.
6. The number you enter will change to become a power.

Conclusion

The newest versions of Microsoft Word have much more user capabilities. We learned how to put a degree in Word in three ways, which ones do you know?