Quite often you can encounter situations where, for some reason, users of Windows systems have to solve the problem of how to delete a partition. Disk Management (a built-in system tool) allows you to do this without any problems. You can also use specialized programs. But in any case, this issue must be approached very seriously, having first weighed the pros and cons. These actions are mainly used to merge partitions when you need to fix some problems in the system, to prepare for a re-installation, or to convert GPT partitions.
How to delete a partition (disk management)?
Windows systems themselves have a built-in tool for working with any type of partition. This is a utility called Disk Management. Deleting a partition or performing any other manipulations with its help is quite simple.
This tool can be accessed in several ways: through RMB on the computer icon, through the “Control Panel” (disk management is called up through administration) or through the “Run” menu by entering the command diskmgmt.msc.
Here you just need to select the desired partition and use the volume delete line through the RMB menu. The system will issue a warning that the data in this section will be destroyed. If you agree, confirm the action, after which a so-called unallocated area will appear in which you can create a new partition or expand another partition at its expense. But that is another topic.
Disk management in Windows 10 through the command console
One of the universal tools for such operations is the command line, which uses the DiskPart tool (a tool for managing disk partitioning). The steps here are quite simple, but you should be especially careful when choosing the right sections.
So, disk management in Windows 10 or any other version of the system through the command console begins with calling it with administrator rights (cmd) and entering primary and pressing the enter key after it.
After this, executing the list volume line makes it possible to view all the disks and partitions available on the system. Only they will be marked not with letters, but with numbers (the required section can be determined at least by its size).
Finally, we enter the delete volume command, after which, in fact, the deletion follows. If the selected volume cannot be deleted for some reason, you can use an extended version of the delete command - delete volume override. Upon completion of all procedures, you exit with the exit line, after which you can close the console and reboot the system.
The best applications for working with disks and partitions
If for some reason the user does not want or cannot use the tools built into the system, any disk management program used to create logical partitions will be suitable as a removal tool.
Among the simplest and most popular utilities are the following:
- AOMEI Partition Assistant Standard;
- MiniTool Partition Wizard;
- Acronis Disk Director;
- EaseUS Partition Master;
- GParted;
- Active@ Partition Manager, etc.
An example of using a program from AOMEI
Let's take as an example the first utility presented in the list (although almost all of them work according to the same principles and do not differ in particularly abstruse interfaces).
Here you just need to select the section of interest to the user, and then select the delete line in the menu at the bottom left. Everything seems to be simple. But the advantage of this application is that it will immediately offer two removal options: quick and complete. In the first case, the deletion will be carried out in such a way that after this, if there are appropriate programs for recovering information, anyone can access the files and folders previously stored in the partition.
In the second case, as stated, the information will be completely erased, and it will be impossible to restore it even with the most advanced software (the sectors in which the information was previously stored will have zero values). However, for many, the impossibility of data recovery in this case raises legitimate doubts.
Next, select the preferred method and click the “OK” button, after which the pending task will be created. In the panel at the top, click the “Apply” button, and then after checking the correctness of the data in the confirmation window, click the “Go” button. After this, the selected partition will be deleted (the estimated time to complete the operation is displayed at the bottom of the window).
Finally
That's it for third-party programs, Command Prompt, and the Windows Disk Management tool. Deleting a partition in all three cases is quite simple. The main question is only the feasibility of carrying out such actions, because to install the system you will have to create a boot partition, mark it up by formatting, etc. And you should think about the safety of information in advance by copying it to another location or creating a backup copy.
In this article, you will learn how to delete a hard drive partition in the Disk Management console or using the DiskPart utility built into Windows 7.
Warnings
In order to delete a volume, you must log into Windows 7 under an account with administrator rights.
Deleting a partition erases all data stored on it. Before deleting, back up any data you want to keep.
It is impossible to remove from Windows 7 a partition that contains boot or other system files of the same copy of Windows 7, including partitions that contain its swap files. Therefore, if the hard drive contains only one partition, you will only be able to remove it during the Windows installation process.
Before you start uninstalling, set the startup type in the Disk Defragmentation service settings Manually. If this service is disabled, an error message will appear when you try to delete a partition: The specified service cannot start because it is disabled or all devices associated with it are disabled.
Method 1: Deleting a partition through Windows 7 Disk Management
1. Open the Start menu, type diskmgmt.msc into the search bar and press ENTER.
2. Right-click the partition you want to delete and select the command.
3. Read the warning that appears carefully:
and press the button Yes to confirm the deletion.
4. Now the selected section is deleted and an unmarked area appears in its place. In Disk Management Manager it appears as an unallocated partition and is marked in black.
In the resulting unallocated area, you can create a new partition or expand another partition that exists on the same physical hard drive.
Method 2: Delete a hard drive volume using DiskPart (Command Prompt)
1. Run Command Prompt as an administrator.
2. Type diskpart and press ENTER.
This command launches the DiskPart utility built into Windows 7, designed to manage hard drives, their volumes and partitions.
3. Type list volume and press ENTER.
After this, all existing sections with numbers assigned to them will be displayed on the screen.
4. Enter select volume X (instead of X specify the partition number to be deleted) and press ENTER.
With this command you select a volume for further operations with it.
5. Type delete volume and press ENTER.
Attention! After executing this command, the hard drive partition selected in step 4 of this guide will be permanently deleted. This operation cannot be undone. Run this command only after making sure that all previous steps have been completed correctly.
If the previous command does not delete the volume, enter another command: delete volume override and press ENTER.
6. Type exit and press ENTER to exit DiskPart. You can then close the Command Prompt window.
The use of breaks is especially popular among those who often create large documents in a word processor that have sections, subsections, and subparagraphs. Indeed, in this case, using such a Word function is very convenient and greatly simplifies the user’s work. However, it often happens that page breaks are unnecessary, which is why in our article we will examine the question of how to remove section breaks in Word.
In order to understand that it is page breaks that are placed in the document, the user needs to reflect hidden non-printable characters in the document. To do this, go to the “Home” tab, then in the “Paragraph” group click on the “Display all characters” button. What it looks like is shown in the figure below.
When working in Word, it is important to remember that breaks can be placed either automatically or manually. In this case, the user will not be able to delete breaks created by the program, but breaks created manually can be deleted. How? Read below.
How to prevent unwanted page breaks?
First, let's look at this issue using the example of the 2013 Word program. To prevent page breaks, place the cursor before the paragraph to which you want to apply the settings. Then open the “Page Section” tab and open the “Paragraph” window, which we have written about several times above. Then open “Line and Page Breaks”. We fulfill the necessary conditions:
- Check the box next to “Prohibit dangling lines” if you want each part of the page to have 2 paragraph lines.
- If you want to prohibit a break between paragraphs, then check “Keep from next”.
- To prohibit placing a break in the center of a paragraph, the user must check the box next to the item that says prohibiting paragraph breaks.
How to remove section breaks in Word?
To remove manual page breaks in Word, click on the “Draft” section. Next, select “Page Break” by clicking on the border next to the dotted line. After this, press the “DELETE” key located on the keyboard.
How to remove gaps in a large document?
This method is especially suitable for documents consisting of several tens or hundreds of pages. The user is invited to use the autocorrect function available in Word. How can I do that?
Many hard drives are split into two or more partitions. They are usually divided according to user needs and are designed for convenient sorting of stored data. If one of the existing partitions is no longer needed, you can delete it and attach the unallocated space to another disk volume. In addition, this operation allows you to quickly destroy all data stored on the partition.
Removing a partition on a hard drive
There are various options for deleting a volume: you can use special programs, a built-in Windows tool, or the command line. The first option is most preferable in the following cases:
- It is impossible to delete a partition through the built-in Windows tool (the “Delete volume” item is inactive).
- It is necessary to delete information without the possibility of recovery (this option is not available in all programs).
- Personal preferences (a more convenient interface or the need to perform several actions with disks at the same time).
After using one of these methods, an unallocated area will appear, which can later be added to another partition or distributed if there are several of them.
Be careful, deleting a partition erases all data stored on it!
Save the information you need to another location in advance, and if you just want to combine two sections into one, you can do it another way. In this case, files from the partition being deleted will be transferred independently (if you use the built-in Windows program, they will be deleted).
Read more: How to merge hard drive partitions
Method 1: AOMEI Partition Assistant Standard
A free utility for working with drives allows you to perform various operations, including deleting unnecessary volumes. The program has a Russified and pleasant interface, so it can be safely recommended for use.
Download AOMEI Partition Assistant Standard
Method 2: MiniTool Partition Wizard
MiniTool Partition Wizard is a free program for working with disks. It does not have a Russified interface, but it has enough basic knowledge of English to perform the necessary operations.
Unlike the previous program, MiniTool Partition Wizard does not completely delete data from the partition, i.e. it can be restored if necessary.
Method 3: Acronis Disk Director
Acronis Disk Director is one of the most popular programs among users. This is a powerful disk manager that, in addition to complex operations, allows you to perform more primitive tasks.
If you have this utility, then you can delete the partition using it. Since this program is paid, there is no point in purchasing it if you do not plan to actively work with disks and volumes.
Method 4: Windows built-in tool
If there is no desire or opportunity to use third-party software, you can solve the problem using standard operating system tools. Windows users have access to the Disk Management utility, which can be opened like this:
Method 5: Command Line
Another option for working with a disk is to use the command line and the DiskPart utility. In this case, the entire process will take place in the console, without a graphical shell, and the user will have to control the process using commands.
We looked at ways to delete a hard drive partition. There is no fundamental difference between using programs from third-party developers and built-in Windows tools. However, some of the utilities allow you to permanently delete files stored on the volume, which will be a very added benefit for some users. In addition, special programs allow you to delete a volume even when this cannot be done through Disk Management. The command line also works well with this problem.
We are glad that we were able to help you solve the problem.
Poll: did this article help you?
Not reallylumpics.ru
How to remove a hidden drive.
Every user faces this question while operating and working on their computer. The thing is that manufacturers of computers and laptops (the majority), when producing their PCs, create a backup copy of the disk on the hard drive on which your operating system is stored, if you bought a PC with a pre-installed system. This hard drive is a rescue hard drive, and serves as a helping hand for you if you deleted or somehow killed your operating system. This hidden section is also called the OEM manufacturer section.
Without certain manipulations, you will not be able to delete a hidden partition on the disk, since manufacturers usually make it invisible to the system. After all, this section contains a copy of your system, all installed drivers and programs installed by default.
An ordinary user may not even suspect that he is missing 10 - 15 gigabytes of valuable space on his hard drive. If you don’t mind this space, then you don’t have to worry about deleting anything on your system. If you decide to install another operating system, not your own, but your own, then there is no point in keeping a hidden partition on your hard drive. If you do not have a distribution kit for your laptop, you will have to download drivers from the manufacturer's website.
Deleting a hidden partition on a disk.
Removing a hidden partition is a simple and not complicated procedure that is performed without additional programs and utilities. All manipulations can be performed using the CMD command line (windows + R) write CMD and click OK. It is important that your account has administrator rights. Next, we execute the list of commands sequentially:
diskpart #start the partition management program#
list disk #display a list of hard drives#
select disk x #where, x is the disk number from the previous list, for example select disk 2, if it was in the list as Disk 2#
list partiotion #display a list of partitions on the selected disk, output example#
Section ### Type Size Offset
----- ------ --- ---
Partition 1 Main 470 GB 1024 KB
Partition 3 OEM 15 GB 470 KB
In our case, section 3 is the hidden section that we want to delete, let’s make sure of this select partition 3 #select the desired section detail partiotion #detailed information on the section Section 3 Type: 12 Hidden: Yes Active: No
Byte offset: 234216226825
vpachin.ru
The Delete partition/Delete volume field is not active
After I wrote the articles How to add space to the system disk (drive C) + video and How to combine local disks in windows7 + video, I began to receive messages from readers that the “Delete partition” field was not active. Why does this happen... In this article I will tell you in what cases this happens and how to make the Delete section field active.
The "Delete volume" line is not active due to the page file.
One of the reasons when the Delete volume field is not active is when the volume is being used for a swap file.
If in Disk Management in the "Status" field next to the disk that you want to delete or expand it says "Swap file", then you will not be able to delete or expand the volume. First, you need to remove the paging file from the disk, and then work with it.
The "Delete partition" field is not active.
Another case is that you deleted a volume and then want to delete a partition, but the “Delete partition” line is not active.
This has to do with hard drive partitions. If the partition you want to delete is surrounded by a green frame, and there are volumes inside the partition, then first you need to delete all the volumes, and then you can delete the entire partition. Those. delete all volumes surrounded by a green frame, in this case volume D. After this, you will have a partition of size "volume D" + free space with which you can work further, for example, add space to drive C. As you can see, the partition is wider concept than volume. Partitions are made up of volumes, or a partition can consist of one volume.
These are the most popular factors blocking the ability to delete a partition or volume. If you encounter a situation where the methods indicated here did not help you, write in a comment or an email to info(pes)pk-help.com, we’ll try to figure it out.
pk-help.com
How to delete a hidden partition on your hard drive | Computer World
It is possible to delete a hidden partition on your hard drive. You just need to know the necessary programs and methods.
Often, some of the security features implemented in Windows are a little annoying. One such case is a closed secondary partition that takes up valuable disk space. Let's try to remove it.
Security feature: A computer with Windows OS pre-installed usually comes with a so-called recovery partition on the hard drive. This often hidden partition contains compressed program files that serve as a system backup. If Windows does not start, then using these files you can return the system to its original state.
For many experienced PC users, the recovery partition is simply unused space. They prefer to work with their own backup copies or disks, since the back-up method using compressed program files on a hidden partition will overwrite all data (at least on the C: drive) created after purchasing the PC, and then only full recovery of deleted files from with the help of special programs or professionals in this field. In addition, the recovery partition takes up several GB of space, which can be used much more efficiently on computers with small hard drives than for similar purposes.
Bypassing the protection: simply deleting data from the hidden partition does not make sense, since it will still remain hidden. But if the size of the hidden partition were “attached” to an existing one, that would be a plus. The Paragon Partition 2011 program will help you unlock hidden spaces on your hard drive. It displays hidden partitions, deletes them, and adds space to another partition.
Removing a hidden partition: To delete a hidden partition, launch the program and select “Partition Manager” in the first window. In the next program window, you need to select the “delete partition” option.
A wizard will then launch which will show all the partitions on your hard drive. Select the recovery partition. If you are not sure which one to choose, do the following: compare the partition sizes displayed in the wizard with the disk sizes in Windows Explorer (can be launched using the Win+E keyboard shortcut).
After you have found the desired partition, select it in the list of partitions in the Paragon Partition 2011 program, and then click the “Next” and “Run” buttons. After that, click the “Finish” button and go back to the main window of the partition manager.
Enlarging another partition: the created free space must be attached to the partition you need. To do this, right-click on the section you are interested in in the main section menu and select the “Edit section” menu item. In the new window, resize the partition using the slider. Then close the window by clicking on the “OK” button.
Next, you need to return to the main section menu and click the “Run” button. The process will start, the program will configure changes in the hard drive partitions in accordance with the changes you made. After completing the wizard, you need to restart your computer.
Attention: You managed to delete a hidden partition on your hard drive, but after performing all the above operations, the Windows recovery system using the recovery partition will not work. You should use the necessary programs to create a backup copy of the system partition. For example, the Paragon BackUp&Recovery 2011 utility will be able to create a copy of your disk and burn it to an external storage device. If the Windows operating system fails, it can be restored using this program and a backup copy recorded, for example, on one or more DVDs or a USB drive.
In this article, you will learn how to delete a hard drive partition in the Disk Management console or using the DiskPart utility built into Windows 7.
Warnings
In order to delete a volume, you must log into Windows 7 under an account with administrator rights.
Deleting a partition erases all data stored on it. Before deleting, back up any data you want to keep.
It is impossible to remove from Windows 7 a partition that contains boot or other system files of the same copy of Windows 7, including partitions that contain its swap files. Therefore, if the hard drive contains only one partition, you will only be able to remove it during the Windows installation process.
Before you start uninstalling, set the startup type in the Disk Defragmentation service settings Manually. If this service is disabled, an error message will appear when you try to delete a partition: The specified service cannot start because it is disabled or all devices associated with it are disabled.
Method 1: Deleting a partition through Windows 7 Disk Management
1. Open the Start menu, type diskmgmt.msc into the search bar and press ENTER.
2. Right-click the partition you want to delete and select the command.
3. Read the warning that appears carefully:
and press the button Yes to confirm the deletion.
4. Now the selected section is deleted and an unmarked area appears in its place. In Disk Management Manager it appears as an unallocated partition and is marked in black.
In the resulting unallocated area, you can or existing on the same physical hard drive.
Method 2: Delete a hard drive volume using DiskPart (Command Prompt)
2. Type diskpart and press ENTER.
This command launches the DiskPart utility built into Windows 7, designed to manage hard drives, their volumes and partitions.
3. Type list volume and press ENTER.
After this, all existing sections with numbers assigned to them will be displayed on the screen.
4. Enter select volume X (instead of X specify the partition number to be deleted) and press ENTER.
With this command you select a volume for further operations with it.
5. Type delete volume and press ENTER.
Attention! After executing this command, the hard drive partition selected in step 4 of this guide will be permanently deleted. This operation cannot be undone. Run this command only after making sure that all previous steps have been completed correctly.
If the previous command does not delete the volume, enter another command: delete volume override and press ENTER.
6. Type exit and press ENTER to exit DiskPart. You can then close the Command Prompt window.