I've been using wireless mice for a long time now. They are very convenient to use with both a laptop and a desktop computer. I've changed about five already. True, I had to spend money on batteries, but I took the latest model with the ability to charge and am very pleased. Today's article is not about my gadgets, but about how to connect a wireless mouse to a PC or Windows laptop. The connection process itself is not very complicated, but since people ask, it means that it is not always possible to connect. I'll try to do universal instruction which is suitable for different mice (Logitech, Rapoo, Trust, Microsoft, Maxxter, Defender, HP, A4Tech, Razer, Speedlink, etc.), with different connection interface. Wireless, of course.
Today, the market mainly presents wireless mice with the following wireless connection interfaces:
- Radio interface (Wireless)- these are mice that are connected via a special USB adapter (receiver). It comes with a mouse. The connection itself most often operates at a frequency of 2.4 GHz and often suffers from interference. (from the same WiFi routers) . The connection is very simple: insert the receiver into the USB port of the computer / laptop, turn on the mouse and everything works. This is the most popular interface for connecting wireless manipulators.
- Bluetooth– there are much fewer mice with this connection interest compared to a conventional radio interface (which with receiver). Basically, these are more expensive models. They are very convenient to use with laptops, as they have a built-in Bluetooth module. And such a mouse is connected without a receiver. But for a PC, you will have to buy a USB Bluetooth adapter.
- Wireless+Bluetooth- this is when the mouse supports two connection options. Via regular USB radio adapter and via Bluetooth (no adapter on laptops). By choice.
I think you know what connection interface your wireless mouse supports. If not, see the instructions and information on the official website.
We will separately consider the process of connecting via the radio interface (USB adapter) and separately via Bluetooth using the example of a laptop with Windows 10. There are differences there. I have input when connected via Bluetooth.
Connecting a wireless radio mouse via a USB adapter
If your mouse comes with a USB receiver, and this is the only connection interface (or Bluetooth is missing/not working on your computer), then you need to connect this receiver to the USB port of a laptop or desktop computer.
After Windows connections should install drivers. I have already connected many wireless mice, I have never encountered a problem when Windows cannot find or install the required driver. If it so happened that the system does not recognize the device, then you can try downloading the driver or software from the manufacturer's website. We write in the search the name and model of our mouse. For example, "Logitech M185" and in the search results go to the official website of Logitech. There we are already looking for a section with downloads and downloading the necessary driver. But you probably won't have to do it.
We insert the battery into the mouse, or charge it and turn it on. Perhaps the indicator will light up after that. (but it may not be).
After that, the mouse should immediately work. If it turns out that after connecting the wireless mouse does not work, then the first thing to do:
- Make sure that the battery is not dead (by replacing it) and that it is installed correctly.
- Disconnect and reconnect the USB receiver.
- Restart your computer.
- You can go into Device Manager and see if the adapter appears under HID Devices. If we connect the Logitech mouse adapter, then the "Logitech USB Input Device" adapter should appear there. The title may vary.
- You can test the adapter and mouse on another computer/laptop. Perhaps you got married. This also happens.
In most cases, these devices connect and work without problems at all. Especially in Windows 10, Windows 8, Windows 7.
Connecting a wireless mouse via Bluetooth (without receiver/adapter)
I would like to clarify right away that connect mouse to desktop computer Probably won't work without an adapter.. Since the PC usually does not have a built-in Bluetooth module. Therefore, first we need, then and only after that we can connect a Bluetooth mouse according to the instructions. Or use the included wireless adapter (if your model supports this interface).
With laptops it's easier, there is a built-in Bluetooth. True, it does not always work, since it is not installed required drivers. If your laptop does not have a Bluetooth icon in the tray and there is no adapter in the device manager, the corresponding settings in the parameters, then you must first (using Windows 10 as an example). And in the article there is an instruction for Windows 7.
To connect, right-click on the Bluetooth icon and select "Add Device".
Turn on the mouse. Next, you need to activate the connection mode. There should be a button for that. On my mouse, it's labeled "Connect". It needs to be pressed (maybe press and hold). The indicator should start flashing actively. The process of activating the connection mode, of course, may differ depending on the manufacturer and model of the mouse. See instructions.
On the computer, in the window that has already opened, select the "Add Bluetooth or other device" item. Then click on "Bluetooth". When our mouse appears in the list, just click on it. In Windows 7, a window will immediately open that will display the devices available for connection.
A message should appear that the device is ready to use.
The mouse should already be working. We press "Finish". Connection completed.
In Windows 7, everything is about the same, only the windows themselves and menu items look different.
This is a program that allows you to customize additional functions. For example, assign actions to additional buttons, adjust the pointer speed, etc. It all depends on what kind of mouse you have. If the simplest, then you may not need this program.
If the computer does not find the Bluetooth mouse, then first make sure that it is turned on and the connection mode is activated. Try connecting it to another device. You can even to a phone or tablet (on Android).
Auto disable touchpad after connecting wireless mouse
On laptops, you can configure everything in such a way that after connecting the mouse (wireless or wired) the touchpad will be disabled automatically. And this is very convenient, because it only gets in the way. For example, when typing.
As far as I understand, this can only be done when your laptop has the touchpad driver installed from the laptop manufacturer's website. Checked on Lenovo, everything works.
Open Start (or search) and write "mouse". Open "Mouse Options".
Go to "Advanced Mouse Options".
The new window should have a tab "ELAN" (you may have a different one). You need to go to it and check the box next to "Disable when connecting an external USB mouse." Click "Apply".
Everything is ready! Now the touchpad will not work when a mouse is connected.
If you are unable to connect your mouse, have any questions, or want to share useful information on the topic of the article - leave your messages in the comments.
A very common question is how to connect a Bluetooth mouse to a laptop. The fact is that in our time, wireless devices, including peripheral devices for a computer, are becoming increasingly popular. As a rule, a special adapter is included with such a mouse, which is connected to the USB port of the PC.
At first glance, everything is extremely simple. Moreover, there is usually an instruction in the kit. However, sometimes there may be various difficulties that you can not always solve on your own. So, how to connect a wireless Bluetooth mouse to a laptop?
- Using the adapter that comes with the interaction device.
- Through the built-in Bluetooth module.
In principle, both options work in a similar way. In principle, there is nothing complicated, the main thing is to follow a certain sequence of actions.
How to connect a Bluetooth mouse to a laptop: Video
Connection via external adapter
As already mentioned, each mouse comes with an external adapter for connection. Insert it into the USB connector and install the drivers, which should also be included.
It is worth noting that usually the software is installed automatically. I.e operating system automatically detects new hardware and installs the appropriate driver from its database.
But, sometimes you need to install the software manually. After that, just turn on the mouse and you can use it. You do not need to configure anything, as the equipment is already configured and ready to go.
Connecting to the laptop's built-in Bluetooth module
You already know how to connect a wireless Bluetooth mouse to a laptop through an adapter. But, why occupy the already popular USB ports if your PC has a built-in module? So, turn on the connected equipment.
Next, activate the module on the PC. Now in the system tray (lower right corner of the desktop Windows desktop) find the Bluetooth icon and right-click on it. Select "Add device" from the menu that appears. No bluetooth icon in tray? Read how to activate it.
Now just follow the prompts on the screen. As you can see, connecting a wireless mouse to a laptop via Bluetooth is a fairly simple event that absolutely everyone can handle. You can just as easily.
Possible problems
As a rule, if you use the adapter that was included in the kit, then no problems arise. But, errors may appear when trying to use the built-in module. The fact is that if you installed drivers for an external adapter, a device conflict may occur. In this case, you just need to remove the mentioned software and try again.
I classify the purchase of Microsoft Designer Bluetooth Mouse as spontaneous and somewhat contrary to common sense, since I have always treated computer mice as consumables, which inevitably wear out over time and begin to double-click the left button.
Therefore, I did not see the point in choosing expensive and fancy models, and I mainly used the cheap and reliable wired mouse Logitech M100, successively replacing several of these mice one after another.
But the other day, I stumbled upon a photo of a Designer Bluetooth Mouse on someone's Instagram, and I liked it so much that I just went and bought myself the same one.
Let's digress a little from the main topic of the review. As you know, wireless manipulators are divided into those that communicate with the device via bluetooth, and those that use a radio channel for communication.
In my opinion, when buying among more or less equivalent options, it is worth focusing on bluetooth manipulators.
Using the radio link binds the user to a USB radio receiver from the manufacturer of the manipulator. At a minimum, this creates inconvenience when used with smartphones and tablets - you will have to connect this receiver via an OTG cable. By the way, I am not 100% sure that different manufacturers use identical radio transmitters and radio receivers, so there is a chance that when buying a mouse and keyboard from different manufacturers, you will have to occupy 2 USB ports with signal receivers.
Bluetooth, on the other hand, is devoid of the described shortcomings, and allows you to connect several devices at the same time to one receiver on any platform. In this case, only one will be occupied USB port if the device does not initially have an integrated bluetooth adapter, and if it is, USB ports won't work at all.
The reviewed Microsoft Designer Bluetooth Mouse uses just a bluetooth channel in its work.
System requirements
The Designer Mouse has specific hardware and system requirements. It requires a Bluetooth 4.0 or higher device and Windows 8 or later (Windows 7 is not supported) or android version 4.4 and above.
Many users ignore these system requirements, and then they raise a howl in reviews and comments on thematic sites - they say, again Microsoft is to blame for them, they sold a non-working product.
Contents of delivery
Microsoft Designer Bluetooth Mouse comes in a simple triangular box with the Microsoft logo and a sticker stating that the device is ready for Windows 10.
The package includes the mouse itself, warranty card, short instruction and 2 Duracell AAA batteries.
Bluetooth adapter not included - this should be taken into account when buying a mouse for use with a desktop or laptop computer that does not have integrated Bluetooth 4.0
I have just such a case: there is no bluetooth adapter either in the laptop I am currently using or in the desktop computer, and I have not yet bought it. To begin with, I decided to test the mouse in work with my own, to which I had already bought it a long time ago.
Appearance
Microsoft Designer Mouse is slightly larger bank card, and in height about 1.5-2 times lower than the average computer mouse.
The case is made of black matte plastic. It is completely symmetrical, which makes this mouse suitable for both right-handers and left-handers.
Below there is a thin edge of glossy plastic - for better sliding on the surface. The glossy edge is instantly covered with small scratches. It does not spoil the view (who will stare intently at the bottom of the mouse, which it usually rests on the surface?), but by the presence of scratches it can be unambiguously determined if the mouse has already been in operation.
The battery compartment cover is interestingly made - it is held on by a magnet instead of latches. In order to remove it, you need to press your finger on the bottom, and then pick it up with another finger - very convenient.
Below is the only service button used to turn the mouse on/off (short press) and activate pairing mode (press and hold for more than 3 seconds).
The optical sensor has a blue backlight. This is unusual, because Most often, red color is used for such illumination. Together with a black matte case, this creates a feeling of a high-quality hi-tech thing.
Above, in the area where the gap separating the left and right keys ends, is a tiny white LED that lights up for a second after the mouse is turned on, or flashes during pairing mode. 99% of the time the mouse is used, this LED is inactive and completely invisible to the user.
Usage impressions
The first attempt to connect the Designer Bluetooth Mouse to the tablet ended in failure: the pairing with the mouse passed, but for some reason the tablet could not connect to it after that. Deleted the established pairing, turned off the mouse, then turned it back on and activated the pairing mode.
The second attempt was successful, and this time the tablet picked up the connection without any problems.
Feels like this mouse is pleasant to the touch. There are handprints on the buttons, which are not conspicuous from the side, but are clearly visible when viewed up close. Traces are easily removed with a damp cloth.
Despite the noticeable weight (2 batteries in the tray affect), Microsoft Designer Mouse glides easily on the table - much lighter than my wired Logitech M100, weighing half as much.
The buttons are quite loud and hard click. This is not a significant drawback, but I personally prefer softer clicks.
The wheel is also "clickable" and is made of hard plastic - without rubber coating. It has a medium hardness.
The low profile of the mouse can cause some discomfort for owners of large hands, but with a medium-sized hand, there is no inconvenience.
It is unlikely that this mouse will suit hardcore gamers - and not only because of its size and the lack of additional programmable buttons, but also because it “falls asleep” during periods of inactivity (the bluetooth connection does not break) and the first 2-3 seconds after waking up, it reacts to user actions with a delay, and the cursor moves with slight jerks.
It is obvious that the transition of the mouse to sleep mode is done to reduce power consumption in order to extend the period of operation without changing the batteries to the declared 6 months. This does not cause problems when using the device for work or multimedia purposes, but it will definitely create some inconvenience for gamers.
Conclusion
So far, Microsoft Designer Bluetooth Mouse suits me with everything.
This is a stylish and well-made thing, suitable for use with both a desktop PC and a tablet in "marching" conditions.
Hopefully it will last a long time.
Bluetooth mice are wireless input peripherals designed to be connected to a desktop computer or laptop. It usually comes with a USB adapter. During the operation of the manipulator, the capabilities of Bluetooth technology are used.
Mouse connection
There are 2 ways to connect a Bluetooth mouse to a laptop:
- using an adapter;
- via the built-in Bluetooth module.
The Bluetooth mouse works by radio. The connection is made by transmitting a signal with a frequency of 3.4 GHz from the optical sensor of the device to the receiver - a standard Bluetooth (adapter or built-in module). The distance from the mouse to the receiving device should not exceed 10 meters.
Design features
The market offers to buy a Bluetooth mouse of LED or laser type. Both types of devices use the same principle of operation, which consists in scanning the surface and converting the information received into coordinates. The difference lies in the type of sensor installed, which can be LED or laser.
In the online store "Eldorado" you can buy a Bluetooth mouse at an affordable price. The range includes models of various shapes, sizes, colors and features, from ordinary to gaming.