Losing information is an unpleasant thing, especially when there is no backup copy of the data. When a user deletes files and folders from a disk, the clusters in which information is stored are not overwritten, but are only hidden from reading; the information continues to remain on the media until it is overwritten by other data. Thanks to this, deleted directories and files can be restored. It's funny, file recovery is possible even after formatting the disk! Undelete Navigator is a guide to areas hidden from the user's eyes with deleted data on a hard drive, flash drive, camera card, video camera or other storage device. The Undelete Navigator program is a navigator for files and folders deleted from storage media. Recover files? There is nothing simpler, you just need to download the free program for recovering deleted files Undelete Navigator.

File recovery

To recover files on your computer, run the program, select the drive from which you want to recover information and click "Scan". The program will analyze the drive and display a list of folders and files available for recovery. Select the files and folders you need to restore and indicate to the utility the directory to which you want to restore them. The utility can recover files from drives formatted in FAT, FAT32 and NTFS. The program has a simple interface; everything in Undelete Navigator is intuitive. If you did not perform any write operations on the drive on which the information was deleted, then most likely the files can be recovered.

Do not work with the disk or write new information to the disk from which you want to recover files. Do not use the same media from which you are recovering data to save the recovered directories and files, as you may touch an area from which it is still possible to recover information. If you overwrite it with recovered files, further file recovery will become impossible. Regularly make archival copies of folders and files that are valuable to you, this will save you from bad moods and worries in the future.

Screenshots of the Undelete Navigator program

The current situation on our roads is quite critical: constant traffic accidents, widespread traffic jams, etc. Because of this, many motorists are simply forced to install satellite navigation systems, or GPS navigators, in their cars. However, these devices, like other modern devices with built-in GPS signal receivers (communicators, phones, smartphones), are also prone to breakdown. Now you will learn how to restore your navigator. We just need an archive with a suitable firmware version.

How to fix a navigator: instructions

1. There are two ways to restore GPS navigators - by downloading new firmware and without flashing using a simple Soft Reset. The first method: by downloading new firmware. This method is elementary, because absolutely completely similar to flashing a cell phone. You just need to download the archive with the required firmware version from the Internet to your computer and unpack it using an unzip tool.
2. Then you need to remove the MicroSD memory card from your navigator, then insert it into the card reader and start copying the already downloaded firmware file to the root directory. Remove the memory card from the device and insert it back into the navigator.
3. Turn on your device and wait for a dialog box to appear asking whether it is advisable to flash it. After consent, the re-flashing of the navigator will begin. After the installation is complete, you need to click “Ok”, then a window will appear on the screen where further instructions and directions will be written. At this point, the restoration of your navigator is complete.
4. Now let's talk about SOFT-Reset. This is the name of a certain software reset of all the navigator settings that it initially had. In order to start restoring the GPS navigator, you need to go to “ResidentFlash”, and then to JBSA4UI, where in two files: jbssetting.ini and jbssetting.bak in the line “Default Setting” = 0 you need to change “0” to “1” .
5. After all these listed manipulations, you need to restart the navigator. Then go to the “Settings” - “Info” folder. At the very bottom there will be three icons: “USB Settings”, “Navigation Path” and “Werkseins”, the last of them will be Soft – Reset., or in other words, return to factory settings. Click on it. A message will appear: “Are you advised that you want to restore factory settings?” Click "Yes". In the future, the original parameters will return. The navigator has now been restored.

How to restore Navitel navigator

Navitel is a navigation system software developed by CST JSC specifically for users of GPS navigators and mobile devices. This program has a detailed map of Russia, displays infrastructure facilities, highways and roads in three-dimensional form, and offers the necessary information for better orientation in unfamiliar terrain. Using the Navitel Navigator Updater program, you can restore or update maps and the Navitel program itself.

1. First you need to install Navitel Navigator Updater on your computer.
2. Connect the navigator to a PC, which must have Internet access, using USB, in Mass Storage connection mode.
3. Launch Navitel Navigator Updater.
4. Follow the instructions for updating navigation maps, as well as the Navitel Navigator Updater program.
5. The maps and software on the navigator will be updated automatically.

Now you know how to restore your car navigator. Our recommendations will be useful both when installing a new navigator, and when updating and restoring maps, for example, on a navigator such as Navitel.

If you already have a GPS (purchased at a second-hand store or donated by friends), then the first thing you need to do is learn how to return the navigator to factory settings. To do this, go to Menu, select Preferences, then System, and then Reset to factory defaults. TomTom and Garmin (as well as others) do not have the same menus, but the essence is more or less similar in all of them. You need to restore the navigator in cases where it has already been used and stores the data of the previous user.

If you need to know how to choose a good navigator from scratch, then first you need to focus on what is most important and choose according to your needs: - price; - screen expansion; - voice control; - touch display; - set of maps (and their price ) ;-interface language and voice control;-support for DVRs. These are the basic requirements you should expect from a GPS receiver.

To understand how best to choose a navigator, it is important to know what additional features it may have: - playback of multimedia files (pictures, music, videos); - Bluetooth connection with a phone; - Internet connection; - recognition of traffic load on the roads; - support for conversational dictionaries for traveling to other countries. While they're not essential, it's very convenient to be able to surf the Internet on the wide 7-inch display, find out which road to take to avoid traffic jams, and even watch a movie outdoors. The main thing is not to do this while driving.

In order to expand the functionality of your device, you need to know how to set up the Internet on your navigator (only on those that support it). Many models only have Wi-Fi access, although there are also those that use 3G mobile traffic. For each case, the connection steps are slightly different. For example, to connect to a Wi-Fi network, you will need to have a distribution station (AP or router) and know the connection password. Pros of Wi-Fi: quick setup and high data speeds. Disadvantages of Wi-Fi: valid only in the AP zone (10-100 meters from the router). For 3G traffic, a regular telephone SIM card is used. Configurations via the Internet can only be obtained from the operator of this card. Pros of 3G: used throughout the operator’s coverage (whole country); live monitoring of traffic and jams. Disadvantages of 3G: few available navigators, configuration complexity, low speed, additional costs for mobile Internet.

To find out how to Russify the navigator, you will need to change the firmware if the native one does not have Russian. This is done at your own peril and risk, because there is a possibility that the device will fail (and the warranty will not cover this). To do this, you need to search the manufacturer’s forums for available firmware, and also read how to install them correctly. Usually you need to download a special program, download the firmware file, connect the navigator to the computer and perform the program's actions on the firmware. They are different for each GPS navigator. But it’s best to ask the seller in the store if this navigator has Russian. The language can be changed in Menu -> Interface Settings.

Instructions

Restoring car GPS navigators can be done in two ways: by downloading new firmware and without flashing it, using the simplest SOFT-Reset. As for the first method, everything is more or less clear here, since flashing a navigator is completely similar to flashing an ordinary cell phone, smartphone or communicator. To do this, you will need to download an archive with the appropriate firmware version from the Internet to your computer and unpack it using an unzip tool.

After this, you need to remove the memory card from the navigator, insert it into the card reader and copy the downloaded file with the firmware to the root directory. Then you should remove the card from the device and insert it back into the navigator.

Now you need to turn on the device and wait for a dialog box to appear asking whether you should start flashing. After your consent, the flashing of your car “friend” will begin. When the installation is complete, click the “Ok” button, after which a window with further instructions and directions will appear on the navigator screen. This will complete the restoration of the navigator.

Software reset of the navigator settings to the factory settings that the navigator originally had is called SOFT-Reset. To restore the GPS navigator in this way, you need to go to ResidentFlash, and then to JBSA4UI, where in the jbssetting.ini and jbssetting.ini.bak files in the DefaultSetting=0 line, change “0” to “1”.

After this, restart the navigator and go to the “Settings” - “Info” folder. At the bottom you will see 3 icons: “USB Settings”, “Navigation Path” and Werkseins..., the last of which is SOFT-Reset, that is, returning to factory settings. Click on it. After this, a message will appear: “Are you sure you want to restore factory settings?” Click Yes. After some time, the original parameters will return, therefore, your navigator will be restored.

Sources:

• Restoring the navigator

Returns to the seller company are carried out in the same way as any other technically complex product with a warranty period established for it. This action is recommended by the consumer protection law, namely articles 18 to 23.

You will need

• - navigator in its original configuration with documents confirming the purchase (receipt or warranty card).

Instructions

Carefully read the warranty terms and conditions of the product you purchased. If you want to return it with a defect that you discovered after purchase, return it to the store with all available documents and in the same configuration before the expiration of the warranty period for quality control or examination. The sooner you discover a defect in the product, the faster and easier it will be to return your money, but everything may depend on the selling company. The period cannot exceed 10 days from the date of purchase.

If you discover a breakdown of the navigator that was not your fault during the warranty period, also return the product to the seller for an examination and a subsequent refund (may depend on the results of the inspection). The refund period will also be 10 days, even if the examination takes longer. Each day of delay in the examination period established by law obliges the seller to pay you a penalty in the amount of a certain percentage of the paid price of the goods.

In order to return a navigator of good quality that simply does not suit you for some reason that was found out after purchase and not related to the malfunction, talk to the seller or director of the store where you purchased the product.

Please note that the navigator is a technically complex product for which a warranty period is established, so in this case no one is obliged to return the money to you for it, however, many sellers meet buyers halfway in this matter, especially if the product is returned to the same or the next day, subject to maintaining the factory stickers and proper appearance. This also applies to packaging and packaging.

Video on the topic

Helpful advice

Refer to the articles of the law on the protection of consumer rights if the seller disagrees with your desire to return the product.

This is navigation system software developed by JSC "CNT" for users of GPS devices, communicators and other mobile devices. The program contains a detailed map of Russia, provides a detailed three-dimensional display of roads and highways, infrastructure facilities, and offers additional information for the best orientation in an unfamiliar place.

Instructions

Typically, GPS navigators are sold with already loaded versions of maps and navigation programs. However, some motorists require the installation of additional cards that are not contained in this program. Also, owners of navigators often strive to combine several navigation programs on one device for ease of use.

The current situation on the country's roads is extremely critical: widespread traffic jams, continuous traffic accidents and much more. In this regard, motorists are required to install GPS satellite navigation systems in their cars. navigators. However navigators, like other modern units with built-in GPS signal receivers (telephones, communicators, telephones), are prone to breakdowns, in particular, firmware crashes.

You will need

• archive with the appropriate firmware version.

Instructions

1. Correction of car GPS navigators can be done in two ways: with the help of downloading new firmware and without flashing, using the simplest SOFT-Reset. As for the first method, everything is more or less clear here, because flashing a navigator is entirely similar to flashing a regular cell phone, telephone or communicator. To do this, you will need to download an archive with the appropriate firmware version from the Internet to your computer and unpack it using an unzipping tool.

2. After this, you need to remove the MicroSD memory card from the navigator, insert it into the card reader and copy the downloaded firmware file to the root directory. After this, you should remove the card from the device and insert it back into the navigator.

3. Now you need to turn on the device and wait for the dialog box to appear asking whether you should start flashing. After your consent, the flashing of your car “friend” will begin. Once the installation is complete, click the “Ok” button, after which a window with further instructions and directions will appear on the navigator screen. This will complete the correction of the navigator.

4. Software reset of the navigator to the factory settings that the navigator originally had is called SOFT-Reset. In order to restore the GPS navigator in this way, you need to go to ResidentFlash, and then to JBSA4UI, where in the jbssetting.ini and jbssetting.ini.bak files in the DefaultSetting=0 line, change “0” to “1”.

5. After this, restart the navigator and go to the “Settings” - “Info” folder. At the bottom you will see 3 icons: “USB Settings”, “Navigation Path” and Werkseins..., the last of which is SOFT-Reset, that is, returning to factory settings. Click on it. After this, a message will appear: “Are you sure you want to restore factory settings?” Click Yes. After some time, the initial parameters will return, and therefore your navigator will be restored.

GPS navigation is a very popular application in our fast-paced life. You can easily find out your location or get directions to any destination. You can turn on the navigator on different mobile devices: PDA, navigator or phone.

Instructions

1. The most acceptable method of connecting to navigation is using the function directly from your mobile phone. First, you will need to download the necessary maps to navigate your cell phone system. Maps are available on the official websites of GPS systems for all interested users. After that, go to the menu item with navigation, select “Settings” and “Download maps”. The phone system will redirect you to the desired web service. Next, choose a card for the specific region where you live.

2. Select the "Maps" or "Start Navigation" command. After some time, the first download will occur. On the screen of the KMP or mobile phone you will see a map and your location. Then you can bravely calculate distances, plot routes and indicate destinations.

3. To turn on the navigator on your GPS device, you will need to turn on the map page. On the menu page, highlight the “Navigation” application and select “Login.” After that, highlight the “Enable map mode” section and click “Login” again. A page with a map will appear in front of you, on which the dot of your current location will blink. If you encounter any problems while loading, then contact the Yandex Maps or Google Maps services, because these maps are most often used in the navigation system.

4. Since the device is mainly used in a car, you will need to install the navigator on a dashboard that is comfortable for you. Then fasten the navigation system using the screws included in the kit. Make sure the system is connected to each of the required pins. Many systems can operate on battery power, and then you will not need to connect them to the car's on-board computer. But some systems still only work when the ignition is on. So consider all the features of the system you purchase.

A navigator is a special device that will help you navigate even in unknown terrain, indicate the path on the map, commenting on it voice tips. It doesn’t matter how you travel, on foot or by car.

You will need

• – a computer with access to the Internet;
• – Garmin navigator;
• – microphone.

Instructions

1. Add voices to the navigator; to do this, additional files can be downloaded from the official website of the Garmin program; to do this, insert the link garmin.ru/services/voice/list.php into the address bar of your browser. The page has pre-listening files, select the one you like and download it to your computer. After that, connect the navigator to your computer, go to the Garmin/Voice folder and copy the downloaded files there.

2. Add personal voices to the navigator. Connect the navigator to the computer, after identifying the device, go to the Garmin/Voice folder, then copy the Russkiy.vpm file to the computer. Download the NonTTSVoiceEditor application to edit the voice file from the link http://www.softpedia.com/progDownload/NonTTSVoiceEditor-Download-162575.html.

3. Run it and add the file that you copied from the device. Parse it into several *.wav audio files, with separate words and commands, in order to replace typical voices navigator .

4. Launch the Audacity application, you can download it from the official website http://audacity.sourceforge.net/?lang=ru, in order to create voice prompts for navigator regardless. You will also need the TTSVoiceEditor program to listen to existing files and replace them with your own. Download the program here: http://turboccc.wikispaces.com/TTSVoiceEditor#TTSVoiceEditor-Download. Speak the clues into the microphone.

5. Whenever recording, hold down the Rec button. Then save any voiced hint and replace the listened files instead. After you have completed recording the prompts for navigator, collect them from files in *.wav format into one *.vpm file using NonTTSVoiceEditor and copy it to the Garmin/Voice folder of your device. This way you can add the voices of your loved ones to the navigator so that they can tell you the way on your travels.

There are times when you need to clean or restore your phone or tablet. This happens if you need to sell a device or give it away, or if a large number of applications are not necessary. In this case, you need to reset the settings to factory settings.

Instructions

1. Devices from different manufacturers require different steps. If you need to restore your Samsung to factory settings, you need to turn off the phone. Then press several buttons on the case at the same time: the top volume key, “Home”, turning on the device.

2. When updating the factory firmware on a Sony Ericsson, you must first turn on the entire unit. Then press three buttons at the same time: camera mode, volume (bottom button), phone power button.

3. For LG units, you need to completely turn off the phone (turn off the power), then press and hold the following buttons at the same time (holding time - 10 seconds): volume down key, main screen activation button, power button. After this, after the LG logo appears on the screen, you should release the power button. When the Recovery screen appears, you need to release all other buttons.

4. To restore the factory settings on your Huawei device, you need to press three buttons at once: turn on the phone, volume (up), located on the side, and volume (down).

5. If the factory firmware is restored to HTC, the phone must be completely disabled. After that, press and hold the Volume Down key for some time. Next, briefly press the power button (do not hold). The volume down button should be released only when Recovery appears on the screen (3 androids will appear on the screen). Later, find the memory cleaning item (Clear Storage) and select it by pressing the power button. The last step will be to confirm the selected actions, for which use the volume down button.

Note!
It is worth remembering that contacts, sms, photos and applications installed independently will be deleted.