Questions related to the fact that you cannot log into the router at 192.168.1.1 - entering it Personal Area, lots of. Over time, most users still have to get acquainted sooner or later with access to the interface and personal modem settings.

Also, very often, they use to enter the router settings.

Let's take a step-by-step look at all the stages of logging into the admin panel of the router and the possible difficulties that may arise during the connection.

How to log into the router 192.168.1.1 (admin login)

Enter 192.168.l.l into the browser line - press enter and then, in the window that appears, enter your username and password.

192.168.1.1 not opening — possible reasons ?

• At the beginning, you should pay attention to whether the modem is connected to the network, and whether a LAN cable is connected from the computer to it.

• It often happens that the network card is turned off, and possibly faulty, for this you should " 2 ways" checks network card :
• 1 Right click on network icon(in this case, the Wi-Fi icon, but there may also be a wired connection - the computer icon) on the desktop and further " Sharing Control Center«.

• Then click "Change adapter settings"

• And see if the map is enabled or disabled

• 2 Network card check method: For Windows 7/8 press key combination Win+R, in the appeared window "Run" enter the command ncpa.cpl and press enter.

• In the window that appears network adapters(if disabled) right-click and select enable.

• In the case when the modem is on, the network cable is connected to the modem, and the network connection icon says " Network cable not connected"and a red cross,

• then most likely the reason for the network card itself is its malfunction.

Now you should check the network card connection settings, for this: ( 2 Methods of network card connection settings)

• 1 Way to check settings: In the appeared window " Network connections" (Written above), right-click on the network connection icon and select " State».

• Next, click " Intelligence».

• If all network connection settings are set to receive IP automatically, then in the lines we should see " Main gate-192.168.1.1. and our IP address”, the same subnet.

• 2 Way to check settings: Launch command prompt with keyboard shortcut Win+R, then in the opened line "Run" we enter cmd and then in the window that appears, write ipconfig /all and press input.

• The result should look something like this.

• Please note that the IP address can be 192.168.X.X or 10.X.X.X, or 172.16.X.X and, accordingly, all other settings" " Subnet mask», « Main gate» must match each other, and must be written manually. In this case, we are talking about the default settings 192.168.1.1 (automatic)
• If everything is correct, then you should check the connection of the network card with the modem (technical support calls it pinging with the router), the combination Win+R, then enter in the window that appears cmd press ok and now enter ping 192.168.1.1- press input- should be something like the following.

• If there is no connection with the modem, for unknown reasons, then it will not ping.
• Another reason may be a complete blockage by the Windows firewall (firewall). To do this, you will need to disconnect from the Internet and then turn off the security system completely and try to establish a connection with the modem. Need to press keys Win+R and then enter the command firewall.cpl and press OK. After opening the window go to « Enable or disable Window Firewall s" and turn it off .

Also one of the possible reasons is the browser itself, which logs into the interface of the router, namely its infection with viruses. Here you need to check for viruses the disk on which the operating system, in most cases the C drive (but it's better to do a full check anyway). But there is such a possibility that after cleaning with an antivirus, the system starts to malfunction, as vital for the OS are damaged. Windows files if this happens then it will be required complete reinstallation systems.

• You can install, if not available, another popular Internet browser Opera, Chrome, or Firefox and will try to navigate to the page 192.168.l.l.

192.168.1.1 login and password (standard login data)

• There are less significant problems with the inability to log into the router on 192.168.1.1, namely inappropriate login data. Most often, by default, for authorization in the admin panel of the router (router), the login is admin and the password is admin. Therefore, on the Internet, the input router is often called as 192.168.1.1 admin admin.
• But there are passwords such as: administrator, password, 1234, 123456, 12345678 or nothing is entered. If, nevertheless, the password or login is not suitable, then perform full reset modem settings to the factory settings, a specially existing button reset.
• These instructions for logging into the admin panel 192.168.1.1, with this login and password admin admin, most often produced on all popular models TP-Link, Zyxel, Qtech, NetGear, Huawei, ZTE, D-Link, Asus(with the presence of WI-Fi transmission), specially considering these data by their manufacturers. There is also a frequently encountered entrance to the router at 192.168.0.1 Instructions for which can be found by clicking on the link below.

The router is a convenient solution for building a local and wireless network that allows you to access the Internet from several devices at the same time. However, in order to configure the router, you first need to install it correctly and go to the web interface, where the main parameters of the equipment operation are indicated.

Connecting equipment

Before you go into the settings of the router, you need to correctly install the equipment. You will need:

• Router.
• Network cable.
• Network card on a computer.

Any user can handle installing a router - the main thing is to carefully examine the ports and figure out what they are for. Explanatory inscriptions and different colors of connectors will help in this.

1. A cable is inserted into the WAN / Line / Internet port, which the provider led into the room (usually it is blue).
2. One of the LAN ports (mostly yellow) is plugged into the network cable that comes with the router. The other end of the patch cord is connected to the computer's network card.
3. The power cable is installed in the appropriate slot.

After all the wires are in place, press the power button. If everything is done correctly, several indicators will light up on the router: power, network connection and connection to a computer.

Setting up a router in the system

To open the router interface, you need to set up a network connection. Usually the necessary parameters are set automatically, but it is useful to check their correctness.

These are standard settings that allow the router, using a DHCP server, to independently give an address to the connected device (computer in this case).

Login to the interface

After connecting and configuring the equipment, you can proceed to resolving the issue of how to log into the router. On almost all routers, the interface address, login and password are indicated on the label located on the bottom of the device.

If there is no sticker, then you can view the address for displaying the web interface of the router in the browser using software tools:

1. Open the Network Sharing Center.
2. Proceed to change adapter settings.
3. Double click the connection icon local network.
4. Click "Details" and look at the "Default Gateway" value.

If you changed your username and password yourself, but cannot remember the new values, then use the Reset button on the router to reset its settings to factory settings. After resetting the parameters, the identification data will become standard - admin / admin.

Viewing the router address is optional. Most manufacturers use the same address, so the order in which the router interface starts different models not much different.

For example, TP-Link and D-Link routers use the IP address 192.168.0.1. After entering this value, an authorization window appears in the address bar of the browser - you need to enter your login and password in it. For some router models D-Link Dir you need to specify only the login, the password string can be left empty.

Asus and Netgear routers have the default address 192.168.1.1. Login and password are also usually standard - admin / admin. But there may be options: for example, NETGEAR router WGR614 login will be “admin” and password will be “password”.

For Huawei routers, the login information is slightly different from the usual values. The address for entering the interface is 192.168.100.1. The login and password are also not quite standard - root and admin, respectively. Some models have even more complex pairs for authorization.

Zyxel Routers Keenetic have an easy-to-remember address my.keenetic.net. Alternatively, the standard address 192.168.1.1 is used. The login will be the word "admin", and the password when default settings – 1234.

It may seem confusing, but it's actually quite simple. In 90% of cases, the address will be 192.168.0.1. or 192.168.1.1, and the authorization pair is admin/admin. If these values ​​do not allow you to open the web interface, then carefully read the instructions - the address, username and password are always indicated there.

Possible login errors

If you go to the router settings using automatic settings fails, try setting the login parameters manually using the IP address of the router.

Knowing the IP address of the router, you can manually specify the TCP / IPv4 protocol parameters:

To understand what values ​​\u200b\u200bneed to be specified, let's take the IP address of the router - for example, 192.168.0.1. Based on this address, fill in the lines as follows:

• The IP address is 192.168.0.2 (the last digit must be between 2 and 254).
• The subnet mask is 255.255.255.0 (always remains the same).
• The main gateway is 192.168.0.1 (the address of the router is indicated here).
• The preferred DNS is 192.168.0.1 (the address of the router is also registered).

With these settings, the problem of launching the router's web interface through a browser should be resolved. Then you just have to set up the Internet and create wireless connection so that the Wi-Fi router begins to perform its functions of providing constant access to the network from different devices.

The more people use broadband Internet access, the more often the question arises - how to enter the settings WiFi router?! Many even know that IP is used to enter the router settings. 192.168.1.1 , or less often - . And yet, with access to the web configurator, some incomprehensible stories constantly arise, forcing the user to surf the Internet in search of an answer - how to enter 192.168.1.1 to configure the router. This manual will fully answer all your questions and help you understand all the basic subtleties associated with accessing the configuration parameters of a wireless router.

What we're going to talk? To begin with, I will conduct a small "educational program" and tell you in brief what kind of addresses 192.168.0.1 and 192.168.1.1 are, why they are needed in home network, where they need to be entered in order to enter the page with the settings of the router and what to do if this does not work ?!

Most often, such questions are of interest to those who have just connected to the Internet, bought a Wi-Fi router for this, and then do not know what to do with all this stuff! This is how modern network devices are arranged that before you put it on the network, you need to change the basic configuration settings to those recommended by the provider to which you are connected. You will also have to open the router settings if the Internet has stopped working due to the settings being lost, or when you need to change the WiFi password or any other options. Moreover, no matter what router you use - Asus, Zyxel Keenetic, Tp-Link, D-Link, NetGear, Trendnet, Tenda, Linksys or something else - the process of logging into the router's web interface through the IP address 192.168.1.1 (or any other) is almost the same everywhere and no different!

IP 192.168.1.1 - what is this address and how to use it

Any modern Internet access device, be it an ADSL modem, a WiFi router or an xPON optical terminal, is a mini-computer! It has its own processor and RAM, and it is controlled by a special operating system. Therefore, one should not be surprised at such an abundance of various settings and functions that modern routers are endowed with. Two networks are usually connected to this mini-computer:

1. WAN or Wide Area Network- this is an external network that comes with the provider's cable.
2. LAN or local area network- this is your home network, which will include a computer, laptop, phones, tablets and Smart TV TV.

So 192.168.1.1 is the IP address of the router on the local network, using which you can enter its settings. The same IP is the gateway for the home network.

AT recent times, manufacturers began to assign domain names to ordinary home Wi-Fi routers on a local network along with this. The brightest examples:

Asus - asusrouter.com TP-Link - tpinklogin.net, tplinkwifi.net or tplinkmodem.net Zyxel Keenetic - my.keenetic.net NetGear - routerlogin.net Rostelecom routers - http://rt

That is, in the address bar of your web browser, instead of the IP address 192.168.1.1, you must enter a symbolic name and press the "Enter" button.

How to find the IP address of a WiFi router

As I said above, to organize a home network and access to management, each router has its own local IP address, through which it will be available to all clients. It will also be listed as a gateway for all gadgets connected to it. How to find the address of the router? Yes, very simple. We take it in our hands and turn it over. For example, I will show a sticker on the Netis DL4320 modem:

On the back of the case there will be a sticker that contains all the basic information about the network device - manufacturer, model, serial number. Also, in a separate area, the IP address of the router will be registered - 192.168.1.1, 192.168.0.1 or some other. It is this set of numbers that will need to be entered in the address bar of the browser.

If instead of Ai-Pi a symbolic address is registered, then it will already be necessary to enter it. Example - TP-Link TL-MR4320 WiFi router:

By the way, the login and password for entering the router through 192.168.1.1 is written there. Typically, this is the username − admin and password - admin.

If the device suddenly does not have a sticker, then use the instructions from the manufacturer.

How to login to 192.168.1.1 in router settings

Let's take a step-by-step look at how to properly connect and enter the router settings through 192.168.1.1 for beginners!

Step 1. We start with the fact that you first need to properly connect your computer or laptop to it, using which we will further configure the router:

The best way to do this is through the supplied network LAN cable. You can see the connection diagram in the figure. That is, we connect one end of it to the network card of a PC or laptop, and the other end is plugged into the LAN port on the router. In general, you can enter 192.168.1.1 via WiFi, but for this you need to either know the password from his Wi-Fi, or be able to click on. on the router, and then connect within two minutes.

Once you connect to a network device, the operating Windows system can automatically set the connection status to "Restricted", or "Without Internet access". Don't be afraid - it's normal. Since the device is not configured, it does not have access to the global web! This does not affect access to the web configurator!

Step 2 We launch the web browser. You can use absolutely any browser, but I would still recommend using either Google Chrome, or Microsoft Edge. Alternatively, Opera will do. But with Firefox, sometimes there are problems with the markup and the work of interactive elements,

Step 3 In the address bar, where you usually write the site address, type the IP address of the router - http://192.168.1.1(or http://192.168.0.1 depending on what it says on the sticker). We press the "Enter" button. If everything is set up correctly and there are no problems, a window should appear with fields for entering a login and password, as in the picture above. Enter the authorization data to open the web interface. Usually used to login to 192.168.1.1 login admin , password admin . Some D-Link models may not require a password. On Tenda routers, the username and password may not be required at all!

Setting up a modem or router is done through a web interface, which simplifies “communication” with sometimes capricious hardware.

You can get to the router by typing in the browser what kind of address it is so simple, everyone knows who has ever set up a router.

However, if you just go to the router and enter according to the instructions desired settings, then the connection to the Internet is not always established.

And it happens that in general, after typing, the computer reports that it is impossible to connect, and in such a situation you have to postpone the instruction and turn on the logic.

We check and configure the connection to the Internet and Wi-Fi.

First of all, you need to check if we forgot to connect the computer and the router with a twisted pair cable? Then it is clear that there is no connection and it is impossible to connect. Also, an inexperienced user can confuse the connectors: on the router, you need to select one of the LAN ports, the WAN port is not suitable for this.

If everything is done correctly, the indicator on the router will light up, which is responsible for the corresponding LAN port. However, there are situations when the router is turned on, connected to the computer with a cable, but none of the ports comes to life. In this case, everything is very sad: the problem lies in the router itself, it needs to be repaired.

We check the computer settings through admin admin addresses 192.168.0.1, 192.168.1.1.

The network connection properties must be checked: get an IP automatically, get an address DNS servers automatically. There shouldn't be any network addresses, if something remains from the previous settings, then because of this there may very well be problems with logging into the router. It happens that the option with “get an IP automatically” does not work, then you have to manually fill in the addresses, but you just need to do it correctly. In particular, you should specify the address of the router in the line of the main gateway and the preferred DNS server.

Also, do not forget about the browser settings. If a proxy server is mentioned in the local network settings, then the computer and the router will probably not “make friends”. At the same time, we will turn off the Windows firewall: there is no special protection against it, but it can interfere.

Here are actually two main directions in which you should look for the reason why such problems initially arose with setting up the router. You can still make a mistake if the router address is not 192.168.1.1, but such an oversight is possible only when the user has not looked at the setup instructions. Yes, and sometimes the IP address is written on the router itself, you just need to study the sticker glued on the bottom or side of the device. In the same place, the password with the login is often indicated, usually it is admin and admin.

I tried to make this instruction as simple as possible to explain to newcomers to networks how to enter the router settings using its IP address 192.168.1.1. It will be relevant when setting up Asus, Zyxel, TP-Link, Tenda routers, as well as branded routers by Rostelecom, Dom.ru, TTK and Beeline. It is no less useful for more confident PC users who want to increase their level of knowledge in the field of network technologies, or have difficulty accessing the router's configuration interface via IP or.

Attention! This insert is for the “little ones” in IT. Experienced can safely skip it!
The fact is that this small device with antennas and wires connected to it, which distributes the Internet to your laptop, TV and TV, is called a router or, as it is commonly called by the people, a router (router in translation from of English language and means "Router"). Inside this box there is a processor, RAM, and even its own operating system, usually based on Linux. It is also called "firmware". It must be updated regularly and must be pre-configured before use. Since the router has Ethernet ports and a WiFi access point, that is, it is a network device, it also has its own local address - usually IP 192.168.1.1. At the entrance, authorization is required, where you need to specify a username and password. Usually the password is admin and the login is admin. But not always!

Some manufacturers use a different local IP address by default to log into the control panel. A vivid example is a Xiaomi router with the address 192.168.31.1, Huawei uses 192.168.100.1, Belkin has 192.168.2.1, and MikroTik has 192.168.88.1 IP. The factory login and password may also differ. As a hint for the user, the manufacturer usually sticks special stickers on their gadgets, which contain all the access parameters. You can find it by turning the router upside down. And if it does not lie, but stands vertically, then the sticker is usually glued to the back of the case.

And here users may have various problems with which they sometimes cannot cope on their own. Let's discuss in detail all the problems that arise with access to the router and how to solve them.

Entering settings through 192.168.1.1

In order to enter the web interface of a network device, you will need a computer or laptop in any case. You can also log in from a tablet or phone - I'll tell you how to do this a little later. There is another good reason to use a PC for this purpose - the router site is poorly optimized for mobile devices. In addition, not on all models you can pick up WiFi without first setting it up.

For example, I'll show you how I usually do it on my laptop with Windows 10. I connect to the device using network cable, then I open the browser and enter the address or http://192.168.1.1 and press the Enter button on the keyboard. Like this:

If there are no problems with the equipment and you entered the address of the router correctly, then an authorization page should appear, in which there will be fields for entering a login and password.

But if suddenly a page appears search engine Google or Yandex, in this case, you must first make sure that you enter the IP of the router in the address bar, and not in the search bar, which is on the additional extension panels. If it still doesn't work, try opening it with a different browser. Best suited for this is Chrome.

Enter the username in the login field - usually admin, in the password field, respectively, the password. If you do not know them, then you can also look at the sticker glued on the case. Here, however, it must be taken into account that now the Administrator password is changed when the router is first configured. If you forgot it, then only resetting the settings with the "Reset" button will help.

If there are no problems and everything is done correctly, then the personal account of the router will open for you. This is not quite the correct name, but it is important for us - a personal account, a router website or a web interface. It is important to understand that this is the device settings interface:

Unfortunately, it is not always possible to reach this point, because before that there are various errors that prevent this. Yes, even if you managed to reach authorization, it is not at all a fact that the login and password “admin / admin” will work!!! Let's look at the most unpleasant situations!

The personal account of the router does not open!

The site for setting up a modem or router, which many users prefer to call "Personal account of the router", is correctly called Network device web interface. It is a set of HTML pages that contain all the necessary parameters that allow you to fully unlock the potential of the device and configure it to the requirements of the end network. As mentioned above, in order to access it, you need to enter the IP device in the browser - http://192.168.1.1 - and press the Enter key on the keyboard:

Attention! You don't need to enter www in the address. or a domain zone (for example, .ru, .com, etc.) This is not a site on the Internet, this is a page on a local web server that runs on your modem or router. It is enough just to do as in the picture above.

Now let's talk about the most common difficulties that await an inexperienced user. The very first and common problem about trying to get to the router through 192.168.1.1 (login to TP-Link, Zyxel Keenetic and ASUS) - this is the error "Cannot access the site." This is not necessarily a malfunction of the device (although this happens). The reason for it can be either a simple malfunction or incorrect settings.
What to do and how to fix this error?! Let's figure it out!

1. Errors when entering the address 192.168.1.1

According to statistics, more than 50% of difficulties with accessing a modem or router are associated with an incorrectly entered IP address that is not recognized by the operating system, or is recognized, but not correctly. Firstly, many users mistakenly indicate the wrong protocol - instead of the usual HTTP, they prescribe a secure version of HTTPS.

Here you need to keep in mind that http://192.168.1.1 and https://192.168.1.1 are completely different sites. And since the router's web server only has an option available via the regular http protocol, only it will open. The secure option (via https:// ) will not be available and will generate an error "Unable to access the site".
The exception is Wi-Fi routers UbiQuity AirRouter

The exact same result will be if you specify the familiar www index in front of IP, which is familiar to sites on the Internet - or even more interesting - indicate the domain zone - or The fact is that the router's web configurator is spinning on a web server that is running on the router itself. This is not a website! And that means directing the browser there, indicating "www." or ".com" is not needed! How not to specify the protocol http://- You just need to enter one address - and press the Enter button on the keyboard. And that's it!

2. Browser issues

This reason is found, as a rule, on old computers and laptops, where Windows has been standing for quite a long time, the browser cache and cookies are littered with various garbage to the fullest, a bunch of different extensions are installed, etc. In this case, you should not be surprised at the problems with access to the router. There are several solutions.
First, try a different browser: Opera, Firefox, Explorer, or Edge.
Second - clean your Internet browser from garbage. For example, I will give the most popular browser - Google Chrome. We go to the application settings and find the "Personal data" section:

Click the "Clear History" button. The following window will appear:

Select the period "All time". Put a checkmark on " Cookies”, as well as on “Images and other files in the cache”. Click the "Clear History" button. We are trying to get into the router. http://192.168.1.1 won't open?! Then you can try to perform a hard reset of Chrome. To do this, scroll the page of additional application settings to the very end, until the "Reset settings" button appears.

After that, all user settings of the program will be deleted, unnecessary extensions will be disabled. You will get the same browser as it was when you first installed it.

Incognito Mode

The third option, which is suitable if you need to go to 192.168.1.1, but you do not want to reset your Internet browser settings, is to use private mode"Incognito", which is in Chrome and other applications on its platform. To use it, open the main menu of the application:

Select "New Incognito Window" from the menu.
After that, the browser will open another, new window in dark gray tones.

This mode does not use any browser cache or cookies. Installed extensions also will not affect the opened site. Enter the address http://192.168.1.1 and look at the result: it turns out to go to the Keenetic, ASUS or TP-Link router.
If this does not help, then you need to proceed to checking the settings of the operating system.

3. Disable proxy

The reason that the IP 192.168.1.1 of your modem or router is unavailable may be the active settings of the Proxy - a special server through which Internet access is organized. For example, you switched from one provider to another, or moved to another apartment and connected to a new provider. And the remaining old configuration will only interfere.
To check this moment - go to the Windows 10 settings and select the "Network and Internet" section:

In the menu that opens, go to the Proxy subsection, find the "Use a proxy server" switch and move it to the "Off" position.

Again, check the availability of the gadget.

4. Disable antivirus and firewall

Do not forget that the source of problems with logging into the router can be the overly active work of anti-virus software - an anti-virus firewall or a firewall (firewall). Suspicious activity from the external network or an incorrect packet can cause the firewall to block the ability to enter the router through IP 192.168.1.1, or even the entire subnet or the connection itself.

To identify and exclude such a scenario, you should try to temporarily turn off the security system and try to go to the router. If this can be done after deactivating the antivirus, then you need to carefully study the packet filter rules and look for the one that blocks access to the network 192.168.1.0.

Configuring 192.168.1.1 Login on Windows

If you have configured the computer's network card incorrectly, then logging into the router through 192.168.1.1 admin / admin will also be unavailable for you. Therefore, if the above methods did not help, it is worth setting up the adapter, or rather - Internet Protocol Version 4 (TCP\IPv4). To do this, open the Windows 10 Settings, go to the "Network and Internet" section.

In the menu on the left, select the subsection "Ethernet". Here on the right you need to click on the link "Configure adapter settings". A list will open network connections, where you need to select the one through which the modem or WiFi router is connected.

To begin with, let's try to simply restart it - right-click on the adapter and select "Disable", and then - "Enable".
If it does not help, then proceed to setting up the TCP / IP Protocol. To do this, right-click on the connection and select the "Properties" menu item.

In the window that appears, double-click the left mouse button on the line "IP version 4 (TCP / IPv4)" to open the protocol properties window. If something is written there, then first try to reset it all and set the automatic receipt of addresses.

To do this, check the "Obtain an IP address automatically" checkbox. Same for DNS. We check the entrance to the personal account 192.168.1.1. Not available? Then we try to register IP statically:

Check the box "Use the following address" and set the parameters:

IP Address - 192.168.1.2 Subnet Mask - 255.255.255.0 Default Gateway - 192.168.1.1 Preferred DNS Server - 192.168.1.1

Click on the "OK" button. If Windows 10 starts swearing that a conflict of IP addresses has been detected on the network, open the protocol settings again and change IP to another one in the same subnet 192.168.1.0-254. I usually put somewhere at the end - 192.168.1.250.

Resetting the TCP/IP protocol

In cases where nothing helps and you still can’t enter the router’s personal account, you can try resetting the TCP / IP protocol settings in Windows 10. First, let’s reset the parameters of all the main network protocols Windows to exclude possible problems. This is done through the command line. Right-click on the Start button and select " Command line(administrator)":

After the protocol parameters are reset to the initial state, you can try to go to 192.168.1.1 admin again.

The password and login admin on 192.168.1.1 do not match

Let's consider one more "side of the coin", namely, when the router's personal account itself is available, but when you try to enter the admin login and admin password on 192.168.1.1, the device swears at incorrect data (Bad login, Wrong password, etc.) How be in this case?
First, look again at what is indicated on the sticker on the router, in the same place where the IP address is indicated - whether the admin / admin login and password for the entrance are exactly there. If yes, then either the login password was changed earlier and now, since you don’t know it, all that remains is to do a complete reset of the router settings in the way that I showed a little higher - through the Reset button. If nothing is written there, then now I will give a small cheat sheet on the logins and passwords that are used on the router:

Model:	Login:	Password:
ASUS - router.asus.com RT-N10, RT-N11P, RT-N12,RT-N14U,RT-G32, RT-AC51U,RT-N56U, etc.	admin	admin
Zyxel - my.keenetic.net Keenetic II, Keenetic III, Lite, Viva, Giga, Ultra, Extra, Start, 4G	admin	1234
D-Link DSL-2640U, DSL-2650U, DSL-2670U	admin	admin
Acorp Sprinter, W422G, WR-150N, WR-300N	Admin	Admin
Huawei WS319,WS325,WS330,WS550	admin	admin
Netgear-routerlogin.net JWNR2000-100,JWNR2000-200,JWNR2010,R6100-100	admin	admin
netis - netis.cc WF2411E,WF2419E,WF2409F,WF2710	admin	admin
Totolink N150RT,N300RT	admin	admin
Tp-Link - tplinklogin.net, tplinkwifi.net, tplinkextender.net TL-WR740ND,TL-WR741ND,TL-WR840ND,TL-WR841ND,TL-WR940N 450M	admin	admin
UbiQuity AirRouter,AirRouter-HP	ubnt	ubnt
ZTE H108N(Rostelecom, Dom.ru),H118N(Rostelecom, Dom.ru),E5501,MF283	admin	admin

Reset router settings to factory settings

If the error “Unable to access the site” appears again, then you should try resetting the router to factory settings.

For these purposes, each modem, router or GPON ONT router has a special “Reset” button located on the back of the case. To press it, you need to use a paper clip, a toothpick or a ballpoint pen refill. On the turned on device, press the button and keep it pressed for 10-15 seconds. After that, we wait a couple more minutes until it reboots and try to enter the web configurator again.