Many people who have encountered problems with their computer are wondering how to reinstall Windows 10. Sometimes it is not necessary to reinstall the system at all, but rather restore it to an earlier save point or original state. If you are wondering how to reinstall Windows 10 from scratch, you will find it helpful to read the information below.

The reasons that the system began to slow down and freeze may be different. For example:

• virus software;
• a large number of programs;
• lack of registry and system cleaning;
• The disk is too fragmented.

Is it possible to solve these problems without deleting operating system? This is possible; in such cases, a simple system restore (rollback) can help. If you have problems installing a program, or there is virus software that you cannot remove, you just need to restore the system to last point conservation.

It is possible that you noticed some system freezes at one point or another, then you can reset it to its original state. In this case, all programs and files are deleted.

Therefore, do not forget to throw off all important information on removable media or another disk partition.

System rollback

Go to the Start menu, find Settings. Select Update & Security. Go to the "Recovery" section.

Decide what you want to do (reset your computer or roll back to an earlier build) and click Start. It is important to remember that any reset deletes files that were created after the save point. You will be prompted to select them to save before the reset begins. After you save the files you need and roll back the operating system Windows system 10 do not forget to check them for viruses before downloading them back to your PC.

This option is suitable for those who want to install the system again. First, you should transfer all important information to another disk partition, or better yet, to external media. This is necessary because reinstallation involves formatting system partition hard drive(complete erasure of data).

You will need:

• distribution with Win 10;
• external media for creating boot disk(flash or optical drive at least 4 GB);
• drivers;

Installing Windows 10, like Windows 8, is not particularly difficult. If you have Windows 10 installed, proceed to the next step. If not, you need to download it from the official website or find someone else's assembly. The danger may be that if the assembly is untested, you may introduce viruses to your computer. So if you are not chasing a beautiful design, it is better to download the distribution from the official website.

To do this, go to the Microsoft website. Download MediaCreationTool.exe. The “ten” is downloaded using this program. After launch, you must accept the license agreement.

Since your goal is not an update, but a reinstallation, then select the second option.

Select the desired language, which Windows you need to download (in our case, the tenth), and the bit depth.

If you don't know which bit depth is best to choose, just look at how many are installed random access memory. If 3 GB or less, then a 32-bit system is suitable. If 4 GB or more, then 64-bit.

Next, you need to choose to download the ISO file or directly install it on a USB flash drive. If you have a flash drive, connect it to your computer. If you want to burn it to disk, then download the ISO image. The procedure time will directly depend on the speed of your Internet connection. The higher the speed, the faster the download will occur.

Burning an image to disk

To burn the image to a DVD, use any convenient program. Here are a few of them:

• Nero Burning Room;
• BurnAware Free;
• DAEMON Tools Lite.

Let's look at the recording process using ImgBurn as an example. The program is distributed free of charge. After launching ImgBurn, a window will appear in which you need to select the Win 10 image in the Source section. And in the Destination section - a DVD disc.

Click on the picture where there is an arrow from a disk on paper to another disk. This will start the burning process.

Before reinstalling Windows, make sure you have the drivers available. At a minimum you need to have a driver for network card and Wi-Fi. Otherwise, it may happen that you will not be able to go online and download everything you need. And although on Windows, as a rule, there are already universal drivers, it’s better not to take risks and play it safe. If you don't have drivers, download them from the official website. In the case of installation on a laptop, to search for drivers, it is enough to know its brand and model. For a desktop PC, you may need a program to view information about the computer's hardware and software configuration. For example, AIDA or Everest.

Now insert the USB stick or DVD into your computer, restart it and enter the BIOS. Here you need to select a value so that the selected media is loaded first.

Typically, to enter the BIOS you need to home screen press F2 or Delete. If you want to reinstall Windows 10 on a laptop and you don’t know how to enter the BIOS, read the instructions for the device. On different laptops this is done in different ways.

Go to the Boot section and select Boot Settings. There you will see the device startup priority. How to change the order is usually indicated on the right side of the screen. These can be arrows, “+” and “-” or Enter. Save your changes when you exit.

If you are installing Windows 10 from a DVD, the message “Press any key to boot from CD or DVD” will appear on the screen, and while the dots are running, you need to press any key. A clean reinstall of Windows 10 takes approximately 1 hour (depending on the power of your computer). If from a USB drive, the installer window will appear immediately. Select the desired language and click the “Next” button.

Accept the license agreement and select “Custom: Windows installation only.”

Now an important point: selecting the system partition of the disk and formatting it. Please remember that this procedure completely erases the data from this volume.

After selecting a volume, everything goes to automatic mode. File copying will begin. As a result, the computer will reboot. Next comes the preparation and configuration of the components. After some time, a window will appear in which you will need to enter the key again. Click "Do it later."

Select Use standard settings.

You will be prompted to create an account with Microsoft. Click "Skip this step."

Enter your username and, if necessary, password for account. After this you will be taken to the desktop. That's all the instructions on how to reinstall Windows 10. When the system is reinstalled, all that remains is to fill it with the necessary programs and start using it.

With the release of the tenth version of the operating system Windows custom the world was divided into two camps. Some immediately rushed to install the new OS, others were skeptical about it, believing that it, as usually happens, contained too many bugs. But today most of the problems have been resolved, so let’s focus on the question of how to switch to Windows 10 using several basic methods. Along the way, let's consider the problem of saving data and installed user applications.

Should I switch to Windows 10?

Initially, when the system first appeared, both optimists and skeptics were right in their judgments. Indeed, quite a lot of innovations and even several unusual functions have appeared in the system. However, against the backdrop of all this, there were obvious shortcomings related to the fact that after the transition the “Start” button might not work, the system openly monitored the user, etc.

Today, most of the problems have been eliminated, thanks to the constant release of various updates. In particular, this applies to the Anniversary Update. And user reviews indicate that, for reasons unknown to many, the tenth modification is faster than even the seventh, although Windows 7 is considered to be less demanding on system resources.

Minimum System Requirements

Before solving the problem of how to switch to Windows 10, you need to familiarize yourself with at least the minimum requirements for the system configuration. But here the Microsoft specialists made an obvious mistake.

The very first thing is the space occupied on the hard drive. Officially, for a normal installation of a new system on a hard drive, a minimum of 16 or 20 GB is required. Unfortunately, reviews from both users and specialists indicate that Windows 10 under no circumstances wants to be installed if the hard drive has less than 30 GB free space. More precisely, the system is installed up to a certain point, and almost at the final stage of installing updates it reports that a return to the previous OS is being initiated.

With hardware the situation is much simpler. How to upgrade to Windows 10 from Windows 7? As a minimum configuration you can use dual core processors with a clock frequency of 1 GHz, 1 or 2 GB of RAM, depending on the bit depth of the new OS, and video chips that support the ninth version of the DirectX platform.

However, it is worth considering the fact that upgrading to Windows 10 can only be done from versions 7 and 8.1. For some reason, previous modifications and the eighth version do not have such support (for them you need to download the distribution separately and perform a so-called “clean” installation). In addition, the operating systems themselves from which the transition is made must have all the latest updates installed.

Transition queue

Now, actually, about how to switch to Windows 10 from Windows 7 or 8.1. There were several ways. In the simplest version, as it was before, you could switch to Windows 10 for free by registering on the official Microsoft resource and queuing for an update.

But, starting from the end of July last year, free Windows version 10, updated directly from the website of the developer corporation, has become unavailable. But, according to many users, even despite this, in any case, sooner or later the update will take place. But in the Update Center settings you should set the parameter automatic download and installation of updates.

Transition using the Microsoft utility

Many people didn’t want to wait their turn, so even Microsoft experts themselves recommended using a special utility called Media Creation Tool (MCT), which can be downloaded from the website. By the way, its use is still relevant today (but only for supported systems).

How to upgrade to Windows 10 using this software? There are two options here. When launched, the initial window prompts you to either update your computer right now or create installation disk for installation at another time or on another device. The installer itself runs directly within the existing OS environment, rather than from the boot device.

When you select the first item, the download of the distribution files begins, after which during the installation process you just need to follow the instructions of the “Wizard”. Moreover, if a licensed operating system was previously installed, you do not need to activate the new one. However, even when installing Windows 10 without having an account, you don’t need to create one either, but more on that later.

How not to lose important data and installed programs

The utility itself allows you to switch to Windows 10 without losing data. This means not only saving user files, but also settings, and even all installed programs.

To do this, at a certain stage of installation, you just need to select the appropriate item. And, according to the vast majority of all those who switched to Windows 10 in this way, all applications that worked in the previous system function without problems in the new modification, with the same user settings and installed parameters.

How to go from 8 to 10? Windows: clean installation

The transition on unsupported systems will have to be carried out using a separately downloaded installation distribution or one created using MCT.

There is, however, one catch here. If there are no particular problems with optical media, then with USB drives not everything is so simple. The fact is that sometimes the installer, when choosing a partition on which the new system will be installed, informs that only GPT format partitions can be used, and installation in a partition containing boot records MBR, not possible. How to switch to Windows 10 in this case?

To fix the problem, you first need to go to BIOS settings. To their surprise, many users will see not one, but two flash drives there. Reviews say that these seem to be the same device, but one of them, which is in boot priority, has an EFI format. In order for the installation to start in normal mode, you just need to select standard device and download from it. The problem disappears.

Account creation and activation issues

In the question of how to switch to Windows 10 in any way, you cannot ignore some additional questions. Although it is stated that a Microsoft account is required to install the system, this is not true.

When installing from scratch, registration creation and activation can be postponed by selecting the necessary items in the appearing windows with suggestions. But the system will still require activation sooner or later. What to do in this situation? As practice shows, most users use a special utility, KMSAuto Net, which is an activator for Windows and MS Office, although this, frankly speaking, is not entirely legal.

The program itself is a portable application that does not require installation. After launching it, you just need to select Windows activation, wait for the procedure to complete and confirm entering the task of permanent “reactivation” every ten days into the “Scheduler”. As is already clear, the utility cannot be deleted. But all repeated processes will be executed in background, and the user won’t even know about it.

What to do if the user doesn’t like Windows 10?

Finally, let's see how to switch from Windows 10 to Windows 7, if it was the seventh version that was updated (this option is also suitable for 8.1). During the transition, the developers made sure that the user had the opportunity to roll back to the previous system.

To do this, in the settings section of the new system, you need to select the recovery menu, where there will be an option to roll back the computer to previous version. But even here there are pitfalls. You can make a reverse transition only within 30 days from the date of installing Windows 10 and only if the files of the old system were not deleted. Otherwise, rollback will become impossible.

But what if the deadline has expired? Unfortunately, there are no options other than installing the seventh version with full formatting of the system partition. But that's not even the problem. During the formatting process you will have to change the structure file system for cases when Windows 10 has a 64-bit architecture, and the Windows 7 being installed is a 32-bit modification.

A few final words

It remains to add that when installing the tenth modification, you must have an Internet connection, since updates will be downloaded during the installation process. There's no getting around this. And the installation process itself can take quite a long time. According to users who performed such manipulations, with minimal configurations and an Internet connection speed of 100 Mbit/s, complete installation will take about five hours, so you will have to be patient.

Perhaps many PC users do not know that you can reinstall Windows 10 without losing documents, photos, music and other personal data. In this guide, we will look at how to properly reinstall Windows 10 without losing data.

Having been using Windows 10 since the pre-release versions, I won’t say that often, but periodically I received various troubles with the operating system, some could be solved easily, others simply left no options and I had to reinstall the system. As a result, the most reliable tool for dealing with system errors has been developed, no matter how funny it sounds - reinstalling Windows 10.

Reinstalling is guaranteed to help if your Windows 10 system is constantly crashing, or you are getting one or more errors when opening programs or applications. In short, you will have to reinstall the OS if you encounter problems that are fatal. For example, if Windows 10 is running very slowly even after using possible solutions from the Internet, you may want to consider Windows reinstallation 10.

The presented method for reinstalling Windows 10 does not require you to enter a product key, which means you can reinstall Windows 10 without a key.

Guide to reinstall Windows 10 without losing data.

This method is only applicable if Windows 10 is booting. If your computer won't boot, you need to do a clean install of Windows 10.

Step 1: Connect your Windows 10 bootable flash drive to your computer. If you have a Windows 10 boot DVD, insert it into your optical drive.

And if you have an image file Windows ISO 10, Navigate to the folder containing the ISO file, right-click on it, and then click Mount to open the contents of the ISO image in Windows Explorer.

Those of you who don't have Windows 10 USB, DVD or ISO file, must download Windows 10 ISO image from Microsoft using the official Windows 10 Media Creation Tool. The tool, with default settings, will download the same version of Windows 10 as the one installed on your computer (32-bit or 64-bit).

Step 2: Open This Computer (My Computer), right click on USB or DVD, click Open in new window.

Same thing if you mounted the ISO Windows image 10, right-click on the mounted disk, and click Open in new window.

Step 3: Double click on the Setup.exe file. Click Yes in the User Account Control dialog box.

Step 4: After a few seconds, you will see the window - Receiving important updates with two options:

• # Download and install updates (recommended)
• # Not now

If your computer is connected to the Internet, we recommend that you select the first one - Download and install updates (recommended).

You can clear the I want to help improve Windows check box to prevent anonymous data from being sent to Microsoft about the installation process.

It may take several minutes to check for updates.

You may see the following screen within a few minutes - Let's see if you are ready to install. On this moment, it checks that the computer can work with Windows 10, and also checks the space required to perform the operation.

Step 7: Finally, you will see the Ready to Install window.

Tip: You can also select the first option Keep personal files and applications if you don't want to lose installed applications from the shop. But! If you have problems with one or more modern applications such as Edge, or Store, Photos, Mail, please select the option - Keep my personal files only.

Step 8: You will see the Ready to Install window again, this time boldly click on the Install button.

Click on the Install button to begin installing/reinstalling Windows 10. During the installation of Windows 10, your computer may restart several times.

Step 9: The next step is to configure the settings. You can choose either Use Standard Settings or Customize Settings, which allows you to change the default privacy settings in Windows 10. Of course, you can change these settings later on the system itself.

Once complete, you will be prompted to sign in with your Microsoft account, or you can create a new local user account.

As mentioned above, the system will not require a Windows 10 product key after reinstallation if it has already been activated.

All your files will be in the same place where you left them. You will only need to install your favorite programs and applications again.

Let us know in the comments below if you encounter any problems while reinstalling Windows 10.

g-ek.com

How to quickly reinstall Windows 10 without losing personal files

To avoid confusion, let's figure out how reinstallation using “Start over” differs from the previously available system rollback to its original state.

Since the introduction of Windows 10, it has had an option to “Reset your PC.” It is located in the “Settings” → “Update and Security” section under the “Recovery” item.

With its help, you can reset the system, leaving personal files intact. The procedure will return initially installed version Windows 10 will erase all the programs you installed. But if your computer has software pre-installed by the manufacturer, it won't go away.

The Start Over feature added in the Creators Update works a little differently. It also resets (and essentially reinstalls) Windows 10 without damaging personal files. But at the same time, it immediately updates the system to the latest version and removes both the programs you installed and those preinstalled by the manufacturer (except for applications from the Windows Store).

So if your goal is latest version Windows 10 with personal files intact, reset to standard settings and completely cleared of unnecessary software, then the “Start over” option is suitable for you. To activate it, use the instructions below.

Instructions for reinstalling Windows 10

1. Back up your most important files. Windows promises not to touch them, but it’s better to insure yourself against possible system failures.
2. Make sure you have all the necessary passwords and keys for programs that require authorization and activation. For example, if you use Office package, then after reinstallation it may require a product key.
3. Connect your computer to the Internet.
4. Open Settings → Update & Security → Recovery.
5. Under "Advanced recovery options" click "Find out how to start over with a clean Windows installation» and confirm the action.
6. In the window that opens, click “Get Started” and follow the system prompts, carefully reading all notifications.

Windows will reinstall and install everything itself necessary drivers. If necessary, you can install them yourself by downloading from the PC manufacturer's website or using special program.

lifehacker.ru

How to return Windows 10 to its original state with and without saving personal files

Many users are accustomed to reinstalling the operating system “for the sake of prevention.” How to reinstall Windows 10 while preserving personal files, obtaining not only a “clean” operating system, but also all the personal data previously entered into the system?

Windows system update

Already in the eighth version of the operating system, users were offered two different recovery options. If problems arise with the operating system, you can update the technical Windows files(Refresh). All personal data entered into the computer is saved during this operation.

To radically “cure” the system, the user could perform a complete reinstallation - Reset. Personal files were deleted, as were all previous settings or changes made to Windows.

The same scheme was followed Windows update 8.1. In the next release of the system, the developers retained both commands. Now they are “hidden” behind one button, the user can choose the appropriate option independently. The system update logic remains the same: either “cosmetic” or “cosmetic” Windows cleaning, or complete reinstallation"from scratch" with the loss of everything user information.

Both system reset and reinstallation can be performed from a normally functioning environment. If problems with the operating system do not allow you to boot Windows, you can “roll back” the system from the start menu (a separate recovery environment). However, for such a solution you will need an installation disk or a recovery disk.

Update with data preservation

Go to the "Options" section. Here you need to find the “Update and Security” subsection, and in it find the “Recovery” item. To update the system without deleting user information, you need to select the “Return PC to its original state” option and begin the procedure.

The system offers two options in a pop-up window. To ensure that personal files are not destroyed during the update, you should select the first answer: “Keep my files.”

After selecting the convenient option, Windows will begin preparing for the update; this will take a few minutes.

After the diagnostics are completed, the system will show which applications cannot be saved (after the update they will have to be installed again).

The computer will reboot. When the system starts, one more preparatory stage will be performed, then the recovery itself will begin technical information.

The speed of the operation depends on the power of the PC. At the end of the first stage of recovery, the system will reboot again. The next step is to install drivers, install and configure system components, and configure applications.

When all the update steps are completed, you will have a clean system with your personal files saved. However, all programs installed by users will be destroyed. They are fairly easy to reinstall. The system creates a file with a list of all deleted programs on the desktop; you can open it with any text editor.

Update without saving data

The first step is the same as when updating the system with saving information. After selecting the “Return PC to its original state” option and starting the procedure, you should select the second of the proposed options - deleting all files. Remember that with such a reinstallation you will lose not only personal notes, but also all user accounts.

The steps of the procedure are similar to the process Windows recovery without deleting personal information. User participation in reinstallation is not required. The operator is needed only at the last stage to make some settings and parameters in new system(for example, to create an account).

System update and recovery times vary depending on your PC hardware. On average, the process takes a few minutes. You won't have to wait half a day for installation, as was the case with early Windows systems.

How to restore Windows if the system won't boot

If the operating system does not boot, recovery will require an additional disk - an installation disk or a recovery disk. Connect the media to your PC and check whether booting from removable drives is configured correctly.

A flash card can also be used as a recovery disk. You can burn a recovery disc on any computer running Windows control from version 8 and older.

The first message you will see after starting the download is a requirement to press any key. Click the button to continue loading not from the main drive, but from the removable device you previously selected in the settings.

After loading, the Windows installation interface will be displayed on the screen. Select the appropriate language and click “Next”.

On the next screen, click on the “System Restore” link. It is located in the lower left corner of the screen. The next stage is “Diagnostics” and the sub-item “Return the system to its original state”. When prompted, select the “Keep my files” response. To perform this operation, you will need to select your account from the list offered by the system and specify a password for it.

After starting the recovery, the system will reboot several times. If the procedure is successful, the result will be the same as when starting the recovery from a full-functional system.

windowss10.ru

Reinstall Windows 10 without losing files

Let's consider a simple and reliable way reinstalling the Windows 10 operating system. This method is well suited when the system still boots, but is working with some glitches, there are errors, problems with drivers, etc. Or, you just want to get a fresh system and keep your files. This option for installing Windows 10 is similar to resetting the settings on a smartphone or tablet. Upon completion, you will receive a clean system that will not contain any settings or third-party programs.

System Restore is launched from the Control Panel. Open “Start” and select “Settings”. Go to the “Update and Security” section. Next, open the “Recovery” tab. In the “Restore the computer to its original state” section, click on the “Start” button.

Restore your computer to its original state

A window will appear in which you need to select one of two items:

• Save my files - when all are deleted installed programs and all settings are reset to factory settings. But, files that are stored on the desktop, in the “Documents” folder, etc., will not be deleted.
• Remove everything - when the system is completely restored, all programs, settings and files on the system drive will be deleted.

Choose the option that suits you, for example, reinstalling Windows 10 while saving the data.

reinstalling Windows 10 while saving data

The message “You are ready to reset this computer” appears. We familiarize ourselves with the information on the screen and press the “Reset” button.

The recovery process will begin.

The computer will restart. You will see the installation process of Windows 10. At the bottom of the screen you can see that the necessary components and drivers are being installed.

preparation in progress, do not turn off the computer

After some time (depending on the performance of the computer), the desktop will appear. This completes the reinstallation of the Windows 10 operating system without losing files.

In contact with

Classmates

it-delux.ru

Now I will tell you how to upgrade your operating system to Windows 10 from Windows 7 or Windows 8 and not lose a single file. Upgrading to Windows 10 is very easy and anyone can figure it out. Everything is simple and clear. A bunch of screenshots are attached

Before starting the update, I recommend doing the following steps:

1) Copy the desktop 2) Copy the license (just in case)

3) Copy Appdata (Win + R - %appdata%)

Enter your username and password or register on the site

To create an account, click What this? – Create a free account item Microsoft entry Now select Get Windows 10

After this, you will be redirected to a window where you need to select Enchant the tool now (64-bit version)

After downloading the program MediaCreationToolx64.exe or MediaCreationToolx32.exe, run it. We are offered to create bootable media or upgrade your computer now to Windows 10. I choose, Upgrade this PC to Windows 10. I wonder if this program can now download and record bootable USB flash drive with Windows 10. I'll have to check it at my leisure

At the time of boot, you can observe the appearance of several folders on drive C

Windows downloads from a Microsoft source quite quickly. Considering the size of the image, which is about 3.2 gigabytes, it takes 15-17 minutes. After Windows boot 10 media creation will begin. You don't need any flash drive for this. Media creation will be directly in drive C:

We accept the license

How to Upgrade Windows to Windows 10

Problem. How to reinstall Windows 10 without losing files?

My Windows 10 64-bit performance is simply pathetic. It freezes, crashes, displays errors or sometimes displays BSOD. I'm tired of this and will think about reinstalling Windows. However, I'm a little lazy to create backup data, so I would like to know if it is possible to restore or reinstall Windows 10 without losing data?

Any version of Windows OS becomes sluggish and may start performing poorly due to many reasons. Slowdowns, freezes, unresponsiveness and similar problems usually start to occur due to age and heavy use of the PC. However, the same symptoms can occur due to viral or harmful infections.

Another common Windows problem is BSOD, which translates to “Blue Screen of Death”. Experiencing BSOD is not a pleasant experience as users risk losing all their unsaved data. These system stops usually occur due to driver issues, boot configuration data corruption, registry issues, viral infection and other serious problems.

Users are offered blue screen, which specifies a description of the error and a specific code. Since this is a system shutdown, users have no choice but to restart their machine. In some cases, Windows can automatically fix errors within the system and recover completely. Some of these errors have comprehensive fixes, while others can hardly be fixed manually, so reinstalling or rebooting Windows is considered the only solution that can be done at home before taking the PC to professional IT professionals.

The main reason why people decide to endure slow PC, errors, BSOD and other problems is the predetermination of personal data stored on it. In other words, have Windows users No backup copies data, so they don't want to delete the information stored on the device.

Fortunately, you do not need to delete all files to reinstall Windows 10. This step can be completed without affecting personal data such as photos, documents, videos, music, etc. Since Windows 10 version is the most common one these days, in this post we will explain how reinstall Windows 10 without deleting personal data or restart Windows using Windows Recovery Environment.

Reinstalling Windows 10 without deleting data

NOTE. This method is only applicable to Windows 10 OS, which is bootable. If you can't boot your computer, you'll have to reinstall Windows from scratch.

Reset Windows 10 without losing data

ADVICE. Disconnect all USB devices before continuing.

You can try resetting Windows without reinstalling it and improving your PC's performance:

Windows 10 Creators Update introduces another system update feature. Now you can reinstall Windows 10 while preserving your personal data - everything happens automatically, and in the end we get a clean version of the system.

Implemented in the Creators Update new feature“Start Again”, which allows you to automatically reinstall Windows 10 while maintaining personal data (documents, photos, videos, etc.). The operating system will not only be completely cleaned of unnecessary programs and reinstalled, but in addition we also get a completely updated version of Windows 10. How to reinstall Windows 10 without losing your license and personal data using the built-in Start Again tool?

What is the Start Again feature?

The Start Again feature was introduced in Windows 10 Creators Update and is an additional upgrade option. It has more capabilities than the “Reset the computer to its original state” function. It does the following:

• allows you to completely reinstall the Windows 10 operating system from scratch;
• installs all available updates during reinstallation;
• saves personal data of user directories Documents, Music, Images, Videos;
• deletes everything third party programs(in the end you will get a clean OS without unnecessary add-ons);
• produces automatic setup the user account to the state it was before reinstallation;
• automatically activates the license for Windows 10.

Before you reinstall Windows 10 on your computer using this tool, once again pay attention to the following.

The only thing that is saved is your personal data from libraries of documents, images, videos and downloaded files. Everything else is deleted, as you can freely call this option of installing “from scratch” with saving only the most important data for the user.

The advantage of the Start Again application is that during reinstallation the latest current version Windows 10. Thanks to this, the problem with downloading and installation completely disappears large quantity updates.

Which is very convenient, especially for users who use laptops - before this there were several useful solutions to reinstall the system on a PC from the Recovery section. You can restore the OS from this partition using a recovery disk. But, as you know, the recorded installation on disk becomes outdated after a while and we had to install a lot of updates. Now this need disappears, since the Start Again application not only allows you to reinstall the OS from scratch, but also automatically updates it.

In addition, the function removes from the laptop all unnecessary add-ons that were added by the manufacturer for advertising purposes, that is, so-called bloatware (for example, an ineffective pre-installed antivirus software etc.).

Reinstalling Windows 10 while saving data using the “Start over” function

Let's go directly to how to reinstall Windows 10 using this tool. To do this, open the Start menu and go to Settings (the gear icon on the left side of the panel). Then go to the “Update and Security” - “Recovery” tab.

The tab will display the already familiar functions of restoring and returning the computer to its original state through a reset. But we are interested in the option to start over. Find "Advanced recovery options".

Directly below it is a link that says “Learn how to start over with a clean installation of Windows.” Click this link and you will be asked if you want to launch the Security Center app. Windows Defender" Confirm your login to the application.

A window with a “Start Again” option will appear. When you click on the “Get Started” button, the reinstallation process will begin. Everything will be done automatically; for this you do not need either a disk or the Windows 10 installer - it is built into the system.